タイトルまたは説明

ZP***8 High Speed Directional Pulse Hole Metallizing
I. PCB Production Line Equipment Introduction
Engineer Educational Equipment  Structure
★1.Use high speed pulse power source for plating, supply uniform good quality coating.
★2.Fully ABS engineer plastic machine body and inner
groove, with antiseptic, thermo stability, technology flow is beautiful.
★3.Environment protection black hole technology flow application,
No pollution, it can direct discharge.
★4. Cathode oscillation technology, prevent , concentration gradient, add hole inner liquid flowability.
Technical specification:
★1.With 4 groove structure, with acid-washing, soak conducting resin, activate, electroplating function.
★2.Use transparent flip function, it is easy to observe and storage.
★3. Maximum board: **0×**0mm, it can electroplating
5 boards at the same time. 
★4. Minimum hole diameter: 0.3mm
★5.Maximum thickness ratio 5:1
★6.Output frequency: **2kHz adjustable(it can change
as DC power)
★7.Output current: forward direction **5A, reverse ***0A adjustable.
★8.Pulse width: use pulse directional power, forward direction ****0%, reverse pulse 0 to **0% single adjustable. 
9.constantvoltage constant current: current or voltage is
constant, with self adjust function, 2 directional current
real time display function. 
★*0.time setting: work time preset function, time remaining display and automatic power off alarm.
★*1.LCD:6 inch full color LCD, display all work specification.
*2.Circuit protection: with short circuit, open circuit function, supply alarm signal.