タイトルまたは説明

Note:

          1. Shaft length can  be custom made.

          2. Class F magnet wire

          3. Leaf brush system

          4. Carbon brushes

          5. Metal Endcap

          6. EMC suppression for option

          7.with Varistor

Technical data:

1.MEASURING CONDITIONS
       1.1.Rated voltage:              *2  V DC
       1.2.Motor Position:             To be measured with motor horizontally held.
       1.3.Environmental temperature:*5±*0°C.
       1.4.Environmental humidity:*5%±*0%RH.
2.ELECTRICAL CHARACTERISTICS (At initial stage after *0 seconds run-in):
      2.1.At No load
            2.1.1.Speed:               ***0 ±*0% rpm
            2.1.2.Current:             0.*6  A(max  0.*3 A)
      2.2.At Max Efficiency
            2.2.1.Torque:              *5.4 g.cm
            2.2.2.Speed:               ***5 ±*0% rpm
            2.2.3.Current:             0.*1  A(max   0.4A)
      2.3.At Stall
            2.3.1.Torque:              **6 g.cm
            2.3.2.Current:             0.*5  A(max   1.4A)

      2.4.Direction of Rotation:       CCW  ( Counter-Clockwise when viewing from the output shaft
                                       end with positive voltage applied to positive terminal.

3.MECHANICAL CHARACTERISTICS
      3.1.Dimension drawing:     See.
      3.2.End Play:0.*5mm  MAX.
      3.3.Class F magnetwire.  EMI filter: 2caps and 1varistor
      3.4.Operating Temperature:    **0°C ~ **0°C.

Remark:The above technical data are only for reference,we can customerize them according to different requirements after evaluation. 

Typical Applications :

Medical Equippment/Drill & Screwdriver/Foot/Bath/Hair Dryer/Vacuum Cleaner/Air Pump/Washer Pump