Polyurethane Yacht Fender Used Floating Dock 

1, Use compressed air as cushion medium, in case of collision and squeezing, it can deform softly. Interface area is large, counter force is small, it can absorb large energy

2, When ships berth, mostly there are certain angles, charged rubber balls can sufficienty carry on the advantages and realize standter contact

3, Shios may rise or fall with tide moving up &down, charged rubber balls always float and roil, the frictional force is rather small,which may noe damage the ship itself and ball

4,Installation is rather simple. Only by tying on anchor post of the dock or ship, it works

 

 

 

Feature:

1 With the general compression fender, solid foam filled polyurethane fender with floating performance, The installation position is not subject to tidal influence

 2 Compared with pneumatic fenders, has better energy absorption performance, and low reaction performance

 3 Compared with pneumatic fenders, does not require the use of check, inflatable, with maintenance-free; no explosion risk, with safety

 4 Product specifications according to the needs of manufacturing, in the rubber fender in the specifications of the largest

 5  Fender appearance can be applied in a variety of colors, the product is smooth and beautiful, mark marked

 6 Using the chain hanging simple installation ,move to easy chain tire network freedom of choice, to increase the service life of fender

 

Polyurethane Yacht Fender Used Floating Dock specification and performance tuble

advantage:

 1.High Energy, Low Reaction 

 The high elasticity of expanded PE or EVA ensures high energy absorption with low reaction force, which is essential to eliminate the risk of damage to the vessel hull. 

To guarantee a good adhesion of the polyurethane cover to the expanded polyethylene or EVA, xincheng studied a special type of expanded material with a polyethylene compound that presents a very good adhesion characteristic with elastomer polyurethanes.

The expanded PE is wrapped and welded around the steel core, and is covered by an high thickness of elastomer polyurethane that gives goods abrasion and breaking resistance, which ensure a long performance even under strenuous conditions.

 

2.Unsinkable

XC  foam fenders are entirely made of closed cell elastic expanded PE or EVA that guarantees unsinkability even in case of damage caused by breaking, rupturing or shearing when hitting rough vessel sides. Ever cell is separate and so water cannot migrate into the foam.

 

 3.Strong Reinforcement

 In order enhance the performance of foam fenders, nylon fabric layers are individually applied at the optimum position. And skin and reinforcement are applied simultaneously. Meanwhile, multiple homogeneous layers increasing strength and additional reinforcement are applied as the transition layer. Special layers are applied to both ends where stresses are highest. This system enhances the ability of resisting to deflection and shearing force.

 

 4.Wear Resistant

 The polyurethane or SUPA elastomer is spray applied. This creates a high quality and homogeneous skin matrix combining extreme wear resistance with non-marking properties and the option of high visibility colors.