Direction
1. Use a digital scale to exactly weigh each of Crysin resin and
hardener according to the specified ratio.
*Crysin 2.5 has a mixing ratio of resin 2 and hardener 1.
*Crysin 5.0 has a mixing ratio of resin 3 and hardener 1.
2. Slowly mix the mixture for at least three minutes by hand and
2 minutes by a electric mixer.
3. Carefully pour the mixture into a mold or container
4. Do not use a torch to eliminate the surface bubble, this
process can yellow the resin or cause the surface to deform.
5. Keep the ambient temperature to 25°C.
6. Crysin 2.5 will cure to touch within 24 hours and Crysin 5.0
within 36 hours.
7. If liquid colorant is added, do not exceed the colorant by 1%
by weight and additional curing time may be needed.
8. Crysin 2.5 can be poured at 25mm at maximum per pour and
Crysin 5.0 can be poured at 50mm at maximum per pour. If
additional thickness is needed, conduct additional pour after
curing for at least 12-24hours.
9. Surface can be sanded or polished after a full cure. Usually
full cure is completed within 72 hours
Cautions
1.
Do not drink
2.
Do not add the liquid into a spray bottle
3.
Keep out of reach of children and infants
4.
Do not throw the container
5.
Do not leave the product on skin for long duration. Rinse skin
with warm running water and soap
6.
Wearing protective gloves, protective clothing, eye protection is
recommended
7.
Store the product in a well ventilated area away from
heat/sparks/open flames/hot surfaces
8.
In case of fire, use alcohol-resistant foam, dry powder, or
sand
