タイトルまたは説明

1. Technical Data Sheet:

2. Deacription：
PU***7 is one component high quality polyurethane sealant for car manufactory and aftermarket, it cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, PU***7 is manufactured in accordance with the ISO/TS ****9:***2.
3. USES:
Suitable for adhesion between windshield/ side glass and the main part of cars, buses and special vehicles. 
Suitable for Automobile  body structural bonding and sealing.
4. ClEANING:
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
5. PACKAGING:
**0ml cartridge, *0 pcs/carton
 **0ml/**0ml sausage, *0 pcs/carton
6.APPLICATION:
Minimum application temperature: 5°C.
PU***7 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply PU***7 in a continuous bead using enough pressure to properly apply the sealant.
7. ADVANTAGES:
 One-component formulation, excellent smooth appearance. 
 High adhesion strength, modest Hardness after curing.
Durable and excellent extrudability.
No sagging, no pollution and corrosion to base material and environment.
Excellent sealing and adhesion performance, excellent water and aging resistance.
8.ADVICE:
Surfaces must be clean, dry and free from grease, oil and dust. The surfaces must be treated with a cleaning or activating agent and primed with the appropriate primer.
Please construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.
This product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.
9. PRIMING:
Activators and/or primers is not required.