タイトルまたは説明
Raymond mill,Raymond grinding
mill,stone Raymond mill
Raymond mill,Raymond
grinding mill,stone Raymond mill is used to grind barite, calcite,
potash feldspar, talcum, marble, limestone, ceram and slag below
scale 7 of Moth's hardness and **0 odd sorts of non-inflammable and
non-explosive stuff in the traded of mining, building material,
chemical engineering and metallurgy for power generation and
processing. The product size is adjustable on required in the range
of ******5 meshes.
Load the stuff for grinding
evenly and continuously into the grinding chamber of the main
frame. Due to the centrifugal force in rotation, the roller swings
outward and presses closely upon the ring. The shovel carries the
stuff to the space between the roller and ring. When the roller
rolls, the stuff is thus grinded.
After being grinded, the stuff is
to be routed to the sorter along the wind belt of the blower and
the rough powder will be put back to the grinder for regrinding.
The fine powder flows into the product cyclone collector together
with airflow and is expelled from the powder output pipe as
product.
In the grinding chamber, since
the stuff may contain moisture to some extent, the heat generated
during grinding makes the moisture evaporated; since the pipeline
joints are not airtight, the external air is sucked in and the
circulation air mass increases. In order to enable the grinder to
work under negative pressures, the increased airflow is guided to
the deduster anew sequentially to the atmosphere after
purification.
TheRaymond mill,Raymond grinding mill,stone
Raymond mill is one main
products of our company. And as one of the biggest production base
in China, our company has produced the Raymond mill with better WOM
in the Raymond mill market.
Raymond mill,Raymond grinding
mill,stone Raymond mill is
applicable to the grinding and processing of more than **0 kinds of
non-flammable and non-explosive materials with hardness less than 7
and humidity less than 6% in mining, construction, chemical
industry and metallurgy, such as barite, calcite, feldspar, talcum,
marble, limestone, clay, glass. The fineness of the finished
product can be adjusted from **0 mesh to **5 mesh according to
requirements.
Technical features ofRaymond mill,Raymond grinding mill,stone
Raymond mill
1. High-efficiency: the full use of
the jet-flow and optimized impeller structure can greatly improve
the crushing and grading efficiency, thus greatly improving the
production.
2. High grading degree: with the
frequency conversion and grading adjustment technology,
the Raymond
mill,Raymond grinding mill,stone Raymond mill have stable and complete grading system and
the special sealing measure ,which can efficiently prevent the
leaking of the fine particles .And the particle size can reach
**0—***0monyh and the thinnest can reach ****0monyh.
3. Low wearing: the crushing wearing
parts and the impeller of the Raymond mill mainly adopts German
technology. And with the optimized design of the inner cavity
structure and anti-abrasion and allergy materials,
the Raymond
mill has made the
lowest wearing parts and the highest purity.
Raymond mill,Raymond grinding mill,stone
Raymond mill Repair and Maintenance
1. During the application of our
Raymond mill, some personnel shall be arranged to take
responsibility of management from beginning to end. The operators
must be qualified with the required technical knowledge of
operating grinding mills. Before the installation of this grinding
mill, the persons related to the operation should receive technical
training and fully understand the operating principle, performance
and regulations of the Raymond mill.
2. In order to guarantee the Raymond
mill in a normal working state, a safety operation system for the
Maintenance of the equipment must be established. Only in this way
can the Raymond mill be guaranteed to have a long-term and safe
operation. Meanwhile, it is necessary to have the required
repairing tools, lubricant and grease, spare parts and accessories
during the operation.
3. After some period of running, the
Raymond mill should receive an examination and repairing. The
components vulnerable to worn out, such as grinding roller,
grinding ring, relieving tool etc. should be repaired or replaced.
Before and after the operation, a careful examination should be
carried out for the connecting screws, bolts and nuts on the
grinding rollers so as to find whether they are loose or
sufficiently lubricated.
4. When their application time
surpassing about **0 hours, all the rolling bearings in the roller
sleeves of Raymond mill must be cleaned, and the damaged parts
should be replaced. The oiling tool can be either a manual oiling
pump or grease gun.
国: |
China |
モデル番号: |
RM130/RM103/RM082
|
离岸价格: |
(交渉可能)
Get Latest Price
|
ロケーション: |
- |
最低注文量の価格: |
- |
最低注文量: |
- |
パッケージの詳細: |
- |
納期: |
- |
供給能力: |
- |
支払いタイプ: |
- |
製品グループ : |
- |