About
ATS
RDS2 series Auto
changeover switch mainly used for distribution or electromotor
network under *0Hz, rated voltage **0V, rated DC voltage **0V, and
rated current *6A to ***0A, change over between main power and
backup power, mutual work as backup power system and city power and
Generator power. At the same time, it can act as disconnector for
the un-frequency ON and OFF circuit or lines.
Such product are widely used in the power transmission and
distribution system and atomization system of important site which
power off is not allowed, such as fire-fighting, hospital, bank,
high buildings etc.
RDS2 Auto Transfer Switch Equipment (ATSE), is integrate the switch
and logical control together, no need extra controller, is an
electromechanical integration auto transfer switch, with voltage
monitoring, frequency monitoring, communication port, electrical
and mechanical interlock functions etc., can achieve auto control,
remote motor control and emergency manual
control.
Operation is achieve by
logical control board with various logical commands to managing the
motor, gear-box running, motor with spring energy storage, instant
release accelerating mechanism, quickly open and close the circuit
or make quick transferring, through visible status to make sure the
safety isolation, greatly improved the every electrical and
mechanical performance.
RDS2 ATS integral
designed with metal case, compact and strong.
RDS2 ATS, the control
part is with metal cover, switch part with DMC case, have strong
dielectric performance, protection performance and reliable
operation safety.
The switch suitable for
auto transfer between main power and backup power system or two
load equipment's auto transfer and safe isolation
etc.
The switch has
beautiful appearance, novelty, small size, complete functions, is
the best choose among the similar products.
RDS2 series product
have passed the EMC test.
RDS2 Advantages:
It adopted double
complex contact/ horizontal pulling mechanism/micro motor energy
pre storage and micro-computer control technology, basically come
to Zero arc ( no arcing chamber);
Adopted reliable mechanical interlock and electric interlock,
executive unit adopt independent load disconnect switch, it makes
more reliable and safety;
Adopt "Zero Position" technology, it can force to set to Zero
Position under emergency situation ( cutoff two way power supply,
meet the fire linkage requirements;
Load disconnect switch change over adopt singleness motor drive,
switch over smooth and reliable, no noise, little impact;
The driving motor have instant current across only under the load
disconnect switch change over, stable working status no need to
provide the working current, outstanding energy saving.
Executive load disconnect switch have mechanical interlock, make
sure the Normal power and Reserve Power working reliable and no
interference;
Distinct ON and OFF position indicator, padlock function etc., make
reliable and safe isolation between power supply and loading.
High security, high automatization, high reliability, working life
more than ***0 times;
Electromechanical integration design, accuracy change over,
flexible, smoothly, adopt international advanced logical control
technology, high anti-interference ability, no interference
outward.
Have main power ON, backup power OFF; main power OFF, backup power
ON; main and backup power OFF; three working mode (I-o-II);
Easy installation, control circuit adopt plug type terminal
connection
Four operating functions: Emergency manual, motor remote control,
emergency OFF under auto control status, auto control
operation.
Basic Type Switch Control
Characteristic
Suitable for two way main and backup power system, auto transfer
with auto recovery;
Can expand functions by outer connection;
Auto, Remote, Manual control functions;
Delay 0.5s signal detect, avoid miss actuation;
Under Auto control status have "O" position remote control;
Can with RS***5 communication port ( optional), according to
customer required.
Dlivery
Terms
Shipment & Express
& Air express