タイトルまたは説明
Mr Jun Huang:
I'm so glad to introduce our products for you. According to
your description and the characteristic of our products, I show
the main structure, the features and components of the machine as
follows:
â… .
Main Parameters:
1.) Power
supply:**0Vã€*0HZ
2.) Air
pressure:***0L/MIN, **8BARs
3.)
Production: Cotton Core Without wings, I-type, Solid Protect ,
Elastic Waistband Adult Diaper
4.)
ProductSpecification:
by the client
5.) Structure
of the product:
Surface Layer
+ Solid Protect +Cotton Core + Tissue Paper + SAP+ ADL + Elastic
Waistband + Elastic
Ribbon +
Elastic Ribbon +Side Tape + Bottom Film
6.)
Power:**0KW(exclude hot melt applicator andair
compressor)
7.)Design
speed:**0pcs/min
8.)Stable
speed:**0pcs/min
9.) Ratio of
comformity:≥*7%(waste
caused by hot melt
applicator, raw material
and auto splicing
excluded).
*0.) Machine
direction: by the client
*1.）machine
color：by
the client
â…¡.
Main Configurations:
Machinery
Section:
Unwinding
Part: raw
materials areVFDsdecoiled,
constant tension control and auto connect material.
1.) Pulp
unwinding
pulp rack can
hold maximal diameter ***0 roll material.
2.)
up-Tissue paper auto unwinding
tension
control system 1 set( web guide, auto exchanging material 1 set,
inflatable shaft 2 sets, coil frequency conversion motor 2
sets)
3.)
down-Tissue paper auto unwinding
tension
control system 1 set( web guide, auto exchanging material 1 set,
inflatable shaft 2 sets,
coil frequency
conversion motor 2 sets)
4.)
hydrophobic N.W auto unwinding
tension
control system 1 set( web guide, auto exchanging material 1 set,
inflatable shaft 2 sets,
coil frequency
conversion motor 2 sets)
5.)
hydrophilic N.W auto unwinding
tension
control system 1 set( web guide, auto exchanging material 1 set,
inflatable shaft 2 sets,
coil frequency
conversion motor 2 sets)
6.) surface
(Overall or three chip) auto unwinding
tension
control system 1 set( web guide, auto exchanging material 1 set,
inflatable shaft 2 sets,
coil frequency
conversion motor 2 sets)
7.）elastic
waistband auto unwinding
unwinding
material rack 2 rolls, decoiled by pull roll. Adopt stepless ‘S’
wheel to tension pull
materials. web
guide.
8.）elastic
ribbon atuo unwinding with adjustable tightness
9.）wet
strength paperauto
unwinding
tension
control system 1 set( web guide, auto exchanging material 1 set,
inflatable shaft 2 sets,
coil frequency
conversion motor 2 sets)
*0.）side
tape auto unwinding
unwinding
material rack 2 rolls, mechanical manual exchanging material 1
set( slow down to
change)
*1.）frontal
tape auto unwinding
unwinding material
rack 2 rolls, mechanical manual exchanging material 1 set( slow
down to change)
Pulverize and
Forming :
1.)adopt
the copper saw pulverizer to smash both the untreated and hanlded
pulp. Pulp Loading use
cylinder
lifting device. Feeding pulp adopt the Inverter controller, in
order to keeping the proportion
of
the pulp which setting on the touch screen, synchronous with the
host in high or low speed .The
direction of
wood pulp feeding is in line with machine direction.
Maxφ***0mmof
wood pulp.
2.)cotton
corn of absorber are demoulded, adsorpted, and transfered by
net-mould wheel, tissue is
tri-folding
packaged forming.(Dust collecting by clothbag integrate.)
3.)SAP
is twin-screw rationed, applying in mixed way and pumping with
subatomospheric pressure
stratification.
When the SAP is in the lower reservoir, the alarm will
automatically feeding.
Transmission
drived by converter motor.
Knife
mold：
1.)Absorber
press 1 set (press the demolded cotton core through th upper and
lower stick)
2.)Absorber
embossing grid 1 set (according to products design, press out the
figure on the core
through the
upper and lower heating )
3.
) Absorber (cotton core)cutting1 set(according the designed
length, cut off at both ends by the upper
cutter and
lower stick,and transmit)
4.
) hydrophobic N.W cutting 1 set (according the designed length,
cut off at both ends by the upper
cutter and
lower stick,and transmit)
5.
) hydrophobic N.W unit 1 set (splitting)
6.
) surface N.W unit 1 set
7.
) wet strength paper unit 1 set
8.
) elastic waistband slice cutting 1 set (according the designed
length, cut off at both ends by the
upper blade
and lower suction drum)
9.
) side tape splitting 1 set (according the designed length, cut
off at both ends by the upper blade and
lower suction
drum)
*0. ) frontal
tape appressed 1set (according the designed length, cut off at
both ends by the upper blade
and lower
suction drum)
*1. )
Three-stick press device1set
*2. ) ARC
cutting unit 1set (according the designed shape, cut off at both
ends by the upper and lower
stick
*3. ) final
cutting 1set (according the designed shape, cut off at both ends
by the upper and lower
stick
*4. )
Three-stick press device1set
*5. ) Side
fold unit 1 set
*6. ) phase
adjusted without stopping, splitting system adopts shaving cut
type and heat twist pressed by cylinder, all
the heated auto
lift while shut down.
| 国: |
China |
| モデル番号: |
RF-CKB
|
| 离岸价格: |
（交渉可能）
Get Latest Price
|
| ロケーション: |
- |
| 最低注文量の価格: |
- |
| 最低注文量: |
1 set |
| パッケージの詳細: |
- |
| 納期: |
- |
| 供給能力: |
100 |
| 支払いタイプ: |
- |
| 製品グループ : |
- |
