离岸价格
Get Latest Price|
500 Piece Minimum Order
国:
China
モデル番号:
RP208
离岸价格:
ロケーション:
-
最低注文量の価格:
-
最低注文量:
500 Piece
パッケージの詳細:
color box
納期:
15-30days
供給能力:
20000 Piece per Month
支払いタイプ:
L/C, T/T
製品グループ :
-
連絡先担当者 Mr. Benny
Luqiao,pengjie, Taizhou, Zhejiang
Description :
1.Easy handing
2.Fine atomization,which enables the drawing of very fine lines.
3.Choice of different nozzle sizes
4.Comply with the complex and different requirements of design painters.
RongPeng Air Brush-RP**8
Model | RP**8 |
Nozzle size | 0.**0.3mm |
Paint Capacity | 2cc |
Operating Pressure | 1.**3.5bar |
Paint Distance | **0mm |
Pattern Width | *5mm |
Air Consumption | 0.*5cfm |
Spray Gun Trouble Shooting:
Symptom |
Problem | Solution |
Spray gun's body fluttering or spitting |
1.Spray gun's material level too low. 2.Container tipped too far. 3.Loose spray gun's fluid inlet connection. 4.Loose or damaged spray gun's fluid tip/seat. 5.Dry or loose spray gun's fluid needle packing nut. 6.Spray gun's air vent clogged.
|
1.Add material into spray gun's container. 2.Hold more upright. 3.Tighten. 4.Adjust or replace the spray gun's fluid tip/seat 5.Lubricate or tighten. 6.Clear the spray gun's vent hole.
|
Pattern is arc |
1.Worm or loose spray gun's fluid nozzle. 2. Spray gun's material build up on air cap.
|
1.Tight or replace spray gun's fluid nozzle. 2.Remove obstructions from holes, but use meatal objects to clean.
|
Patterm is not evenly spread |
1.Materoa; build up on air cap. 2. Spray gun's fluid nozzle dirty or worn.
|
1.Clean or replace spray gun's air cap. 2.clean or replace spray gun's fluid nozzle.
|
The center of pattern too narrow.
|
1. Spray gun's material too thin or not enought. 2.Atomization air pressure too high
|
1.Regulate material viscosity 2.Reduce air pressure.
|
Pattern width of fan sharp is not enough
|
1. Spray gun's material too thick 2.Atomization air pressure too low
|
1.Regulate material viscosity 2.Reduce air pressure |
Air leaking from air cap without pulling trigger
|
1.Sticking spray gun's valve stem 2.Contaminate on spray gun's air valve or seat 4.Broken spray gun's air valve spring 5.Bent spray gun's valve stem
|
1.Lubricate spray gun's valve stem 2.Clean spray gun's air valve or seat 4.Replace spray gun's air valve spring 5.Replace spray gun's valve stem
|
Spray gun fluid leaking from packing nut
|
1.Spray gun 's packing nut loose 2.Spray gun 's packing worm or dry
|
1.Tighten, but do not restrict needle 2.Peplace or lubricate (non-silicone oil)
|
Excessive overspray
|
1.Too high atomization pressure 2.Too far from work surface 3.Improper stroking (arcing ,spray gun motion too fast )
|
1.Reduce pressure 2.Adjust to proper distance 3.Move at moderate pace, parallel to surface
|
Spray gun will not spray |
1.No pressure at spray gun 2.Spray gun 'sfluid control not open enough 3.Spray gun's fluid too heavy
|
1.Check spray gun's air lines 2.Open spray gun's fluid control 3.Thin spray gun's valve stem fluid or change to pressure feed system
|
Showroom:
Certificate :
Spray Gun Test And Equipments:
Description :
1.Easy handing
2.Fine atomization,which enables the drawing of very fine lines.
3.Choice of different nozzle sizes
4.Comply with the complex and different requirements of design painters.
Model | Nozzle size | Paint Capacity | Operating pressure | Paint distance | Paint width | Air Consumption |
RP**8 | 0.**0.3mm | 2cc | 1.**3.5bar | **0mm | Φ*5mm | 0.*5cfm |
国: | China |
モデル番号: | RP208 |
离岸价格: | Get Latest Price |
ロケーション: | - |
最低注文量の価格: | - |
最低注文量: | 500 Piece |
パッケージの詳細: | color box |
納期: | 15-30days |
供給能力: | 20000 Piece per Month |
支払いタイプ: | L/C, T/T |
製品グループ : | - |