タイトルまたは説明

I. Application: The furnace is a new style speed energy-saving melting furnace, mainly applied to the melting of aluminum alloys, especially to the discontinuous melting of single furnace with more scrap return such as aluminum sections, aluminum products, alloy board and waste aluminum etc. II. Main Characteristics 1. Low energy consumption High temperature smoke is fully absorbed by aluminum material in shaft furnace when its arising, and the furnace body is sealed well with good preserving temperature performance 2. Low burning loss the flame is far away from furnace material, the material is melted once enter into liquid aluminum 3. Even furnace temperature and molten aluminum temperature furnace gas circulation is strong and even distributed 4. Fast melting Compared with traditional square furnace, because charging and melting can be done simultaneously for the circular furnace, charging does not take up the time of melting, generally speaking, the time for melting a furnaces material is about 2 to 3 hours 5. Lower labor strength • Complete charging all aluminum ingot at a time or twice by forklift or crane, and then charging from the top of furnace by charging system no need of labor • Lift packed aluminum ingot to charging roof with crane either, then the ingot could be unpacked and threw into furnace by human or drive system 6. Easy to operate and clean up 7. Long furnace life, the lifetime of furnace base could be equal to or more than 4 years, and the shaft furnace life could be equal to or more than 2 years.