タイトルまたは説明

1.Application of machine

 It is used for plasticating and mixing of rubber.

 2.Main specification

 2.1 Total capacity of mixing chamber                                               **7 L

2.2 Effective capacity of mixing chamber                                          **0L

2.3 The speed of front rotor                                                           4~*0 r/min

2.4 Speed ratio of rotor (front/rear)                                               1:1.*6/1:1.1

2.5 Float weight unit pressure for material                                    0.6~0.8

2.6 Pressure of compressed air to be supplied                              ~*0

2.8 Pressure of cooling water                                                         0.3~0.4 MPa

2.9 Cooling water consumption                                                       ~*5M3/H

2.*0 Main motor power                                                                   **0KW

2.*1 Overall dimension(length×width×height) ***0×***0×***0 mm

2.*2 Total weight                                                                               ~*5/T

3.Construction brief

 The machine is divided into right-hand driving and left-hand driving according  with transmission. The worker affront feeding door direction, transmission system is right or left, then its transmission type is right-hand driving or left-hand driving. The transmission is confirmed according to the requirement of consumer.

The machine consists of main machine, speed reducer, main motor, appertain equipment etc.

Main machine consists of mixing chamber, rotor device, feeding device, discharge device etc. Speed reducer and rotors are rotated toward each other to proceed to plasticate and mix.

Furthermore, furnished with pneumatic control system of feeding door, discharge door, the action of float weight up and down, furnished with cooling system of mixing chamber, rotors, drop door, float weight, furnished with the end surface sealing device for rotor and the end surface sealing device for guide on the bed plate of mixing chamber.

Operation method has manual, auto. Control method of mixing has time control and power control, and it has temperature control device. The operation is shown in the manual for electrical part.