Show Fire Network

タイトルまたは説明

ShowFireNET: *Simple **5 network workable on just *-core twisted cables. *Any ShowFire series of panels with capacity of 1 to *6 zones can be networked. *Common Annunciation and Control at a Central Control Panel **0 Character LCD to Display Network events and Faults. *Self Check t o detect fault in any of the networked panels *Can network ShowFires within. a distance of 1 km. *Unique address to each FACPs in the network . *Network Repeaters can be connected any where in the network How it’s unique: *The connection between FACPs are possible with 3 Wires. This will reduce the wiring cost to a large extent. * Communication is through an RS**5 Standard which is Fast and time tested. * Panels communicate in an Industrial standard MODBUS Protocol. * All network devices can be controlled from a Central Control Panel. General Description: ShowFireNET is designed to fit into the ever looming requirement of the industry for a Low Cost High End fire alarm and control system for large distributed structures.The ShowFireNET network comprises of different FACPs installed in different floors or buildings networked together using only 2 core twisted cable. The Control and/or Annunciation of all these panels can be done from the CCP. A lucrative Product:All panels in the network is having a microcontroller on board which enables speed, synchronization to the network.The serial communication standard is used to take the data through the network.The panels communicate using industrial standard protocol MODBUS. Benefits: Cost reduction: For Networking the conventional methods of taking detector lines form the main panel or taking separate data lines from individual FACP to main panel is confusing and costly because of access wiring. In ShowFireNET with wires all the panels can be interconnected, Reducing wiring cost to major extent. Ease of Operation the network events can be monitored from a Central Control Panel, Which has got an *0 character LCD display and key