Sign Display Counter

タイトルまたは説明

The variable message sign VMS product range is designed to be used in conjunction with display counter modules to monitor and display count values such as the number of available spaces in a car park. The VMS displays this information to visitors at suitable locations. Its large *-digit, LED display panel housed in an outdoor enclosure provides clear visibility.

Up to eight VMS’s can be connected on a single RS**5 bus to display different count values. The count value that a VMS displays is selected by setting an associated node number on its DIP switches. More than one VMS unit can be set to display the same count value.

There is a choice of red or yellow LED colours and the LED intensity can be set to one of four levels via the NCT**0 module to accommodate different ambient lighting conditions.  The Variable Message Sign or VMS is primarily designed to display the number of available car parking spaces.

The Variable Message Sign is a large *-digit LED display housed in an outdoor enclosure that clearly shows the availability of car parking spaces. It works in conjunction with Nortech's panel mount counters.  

The most common application for the VMS is to display the number of available spaces (up to ***9) in a car park. As a vehicle enters the car park, the capacity counter and VMS display will both decrement by 1. When the car park is full, the VMS can display either '***0' or FULL.

Several VMS can be used together to display the same information at different locations. It can also be used in conjunction with Nortech's CountSoft.  For simpler display requirements. We also offer an OPEN/FULL sign.

Features

• Available spaces or visitor attendance display
• Full/count value display options for count values of less than 1
• Outdoor enclosure
• Low voltage operation
• Tilt/pan mounting brackets included
• Up to 8 VMS’s can be connected to a single counting module
• Fully compatible with NorParc and VenueMaster Count
• Management Software

Specification

• Electrical supply Voltage: 9 to *4V DC
• Current Requirement: *@********************/li>
• Physical Display: *0 x 7 LED matrix giving 4 character display (choice of yellow or red)
• Viewing angle: *0o each side of centre
• Housing: Black powder coated Zintec
• Dimensions (mm): **0 x **5 x **0 (W x H x D)
• Display adjustments: 4 brightness levels selectable via NCT**0 module
• Mounting: Options for mounting directly on a flat surface or by using brackets (included) to enable tilt adjustment for wall mounting and both tilt and pan adjustment for pole mounting (3” diameter)
• Cable Termination: Plug-in screw terminal blocks
• Operation Counting capacity: ***9 to ***9
• Inputs Count Bus: RS**5 bus from an NCT**0 counting module delivering up to 8 count values. The count value that is displayed is controlled by the node setting on DIP switches.