Silicone Rubber RTV-2 for Shoe Molds making

タイトルまたは説明

HY***8# silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. Standard Datasheet: Model : **8 **8# Appearance : White white Viscosity (cs) ****0 ***0 Hardness (A0) *0~*5 ****0 Tensile Strength (kgf/c㎡) ≥*5 ≥*5 Tear Strength (kgf/㎝) : ≥7.5 ≥7.5 Elongation (%) : ≥**0 ≥**0 Mixing ratio (%) : 2~3 : 2~3 Operating Time(h) 0.5 0.5 Curing Time(h): 2~4 2~4 Using Instruction: Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of **0g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Note: the product is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of **0 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.