Simens Controled steels sheet Roll Forming Machine with 7ton hydraulic decoiler

タイトルまたは説明

Simens Controled steels sheet Roll Forming Machine with 7ton hydraulic decoiler

Main components brand

Decoiler

( 1) Capacity: 7.0 tons
(2) Feeding width: MAX ***0mm
(3) Expanding range: ******0mm
(4) Way of uncoiling: power-driven

Cutting system

(1) Cutting motion: The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start.

(2) Material of blade: GCR*2with heat treatment

(3) Length measuring: Automatic length measuring

(4) Tolerance of length: +/- 1.5mm

Control System:Siemens brand

(1) Voltage, Frequency, Phase: **0 V, *0 Hz, 3Phase (this is can depend on customer request)

(2) Automatic length measurement:

(3) Automatic quantity measurement

(4) Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved

(5) Length inaccuracy can be amended easily.

(6) Control panel: Button-type switch and touch screen

(7) Unit of length: millimeter (switched on the control panel)

Main Parts

1. 7 tons de-coiler x1 set

2. Main roll forming machine x1 set

3. Control box x1 set

4. Hydraulic station x1 set

5. Hydraulic tracking cutting system x1 set

6. 6 meters Automatic stack x1 set(the minimum require is 6 meters)

7. Servo motor x1 set

8. Servo control system x1 set

9. Cutting mould x1set

*0.Tools and components x1 set

Technical parameters

1. Matching material: GI. PPGI aluminum

2. Material thickness range: 0.**0.6mm **0Mpa, 0.**0.8mm **0 Mpa

3. Main motor power: *1 KW motor with cyclonical pin wheel reducer

4. Forming speed: ***0m/min

5. Hydraulic station power: 5.5 KW

6. Quantity of stands: about *4 stands

7. Shaft Material and diameter: ï¿ *0mm, material is *0CR

8. Material Of The Stations: Guide rail style

9. Tolerance: 3m**0.5mm

*0.Way Of Drive: chain

*1. Controlling system: PLC

*2. Total weight: about *2 Tons

*3. Voltage: **0V/ 3phase/ *0 Hz

*4. Size of the machine: L*W*H *4 m*2.0m*1.4m

*5. Material of forming rollers: *5# steel , coated with chromed treatment

*6. Material of cutter blade: Cr *2 mould steel with quenched treatment ****2℃

*7. The rollers surface is mirror polished.

*8. Spacer treatment: spacers are plated