Small hot rolling press machine for lithium ion battery laboratory

タイトルまたは説明

Small Manual pressing / calendaring / rolling machine used for electrode pressing in battery lab production

Parameters

1.Supply Power: AC**0V/*0Hz.

2. Roll size: diameter **0mm x **0mm

3. Working Power: 0.*0KW

4. Roll surface hardness: HRC*2

5. Press thickness: 0~1.5mm

6. Pressure width: **0mm Max.

7. Working speed: multiltronic,linear speed **1.5m.min,adjustable.

8.max.pressure: about 3 T

9.roller polished

*0. weight: *5Kg

*1. Size: **0***0***0mm

Use

1.Adjustment method of electrode thickness

1)Put the pressure material into the middle of roll,meanwhile spin two interval adjustable handles by anti-clockwise direction (namely down direction),until cant move.Then equip the dialgage and tighten the screws(note:when equipping the dialgage should press it then tighten screws)

2)Turn dialgage dial to zero,then meanwhile oppositely spin two interval adjustable handles ,loosen the roll and take out the pressure material

3)Take out the material,then spin the handles so that to make the dial indicator zero,then read ,when 5μand smash once is best.

2.Turn on and open power.

3.Choose the foreward or reversal knob,if foreward,pay-off from front and ejection of compact from back,reversal is opposite.