タイトルまたは説明

Product Description

Excellent figure, stable performance, simple installation, easy to combine with existing water system.
Special designed for split solar hot water system. Connect in series to provide large hot water for commercial, buildings, hotels, hospitals, swimming pool etc. One or several glass tube broken will not influence system work. High efficiency, low maintenance, convenient replacement. 

 Frame: Zinc Coated Steel/Stainless Steel

Insulation: Rock Wool

Tested pressure: 1.0MPa / *0 Bar

Working pressure: 0.6MPa / 6 Bar.

Number of Tube: *5/*0/*4/*0/*6/*0

Length of Tube: ***0mm

Outer Tube Diameter: *8mm

Inner Tube Diameter: *7mm

Tube Thermal Expansion: 3.3 X *0 *6°C

Tube Material: Borosilicate Glass 3.3

Absorptive Coating: ALN/SS-ALN/Cu(MS)

Absorptions: >*4% (AM 1.5)

Emittance: <7% (**0°C)

Vacuum P: <5****3Pa

Stagnation Temperature: > **0°C

How it works:
1) The operation of the SPA solar collector is very simple
2) Solar absorption: Solar radiation is absorbed by the solar tubes and converted into heat
3) Solar heat transfer: Heat pipes conduct the heat from within the solar tube up to the header pipe
4) Solar energy storage: Water is circulated through the header, via Intermittent pump cycling. Each time the water circulates through the Header, the temperatures is raised by ***0oC / ***8oF. Throughout the day, the water in the storage Tank is gradually heated, We adopt the advanced technology to produce solar water and its related spare parts.

>Vacuum tubes are the heart of solar water heater, our vacuum tube uses the borosilicate Glass which has magnetron sputtering aluminum nitride absorbing coat. We have 2 models: *7mm x 1, **0mm, *8mm x 1, **0mm, >Insulating layer was polyurethane foamed,

>Bracket made of premium cold roll with Plastic spray or stainless steel.

> Fastening pieces was made of stainless steel Screw.