タイトルまたは説明

 Thermal Solar Non Pressure Hot Water Heaters: Atlantis Solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger.

Atlantis Solar water heaters rely on the natural circulation of water between the collector and the tank or heat exchanger. In this type of installation, the tank must be located above the collector. As water in the vacuum tubes is heated it becomes lighter and naturally rises into the tank, Meanwhile, cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system.

This non- pressure system water heater relies on a natural Principle *-"Thermo siphon".As the sun's rays hit the evacuated solar collector tubes , the temperature of the water in the tubes rise to certain heat levels, making the water less dense or lighter. The
hot water naturally moves up to the top of collector and through out evacuated collector tubes converting to the storage tank. The colder water in water tank, then moves down to the bottom of the collector. This process is continuous thermal processing, and **0% natural in heating water from the sun with evacuated specially designed vacuum tubes.

This non-pressure solar hot water heater is an "Open Circuit" system. By the air vent valve on the top of the storage cylinder and the over flow pipe in the bottom of the thermal insulated tank that maintains open to the air. The hot water will circulate freely with out any type of pressure regulators.

These systems move household water or a heat - transfer fluid through the system without pumps. This kind of passive system has the advantages naturally when producing hot water with out electricity to heat or circulate water. This makes passive systems generally more reliable, easier to maintain, and often inexpensive.