ST-36N Tyre Nitrogen Filling Station

タイトルまたは説明

ST**6N Tyre nitrogen device

* Pump the air from the tyre by the internal vacuum generator before nitrogen inflation

* Auto-Start Inflation

* Single Tyre Application

* Suit for: Car, Light Truck

ST**6N Technical Data Summary

Dimensions (Height*Width*Depth）***5mm***0mm***5mm

*9.4”**7.6”**7.1”

Net Weight                                                    *7kg/**1.8lbs

Gross Weight                                                **4kg/**9.3lbs

Packing Size (Height*Width*Depth）***0mm***0mm***0mm

*4.3”**8.7”**0.1”

Power Requirement                                  ******0Vac *0/*0HZ

Power Consumption                                 *0VA

Operating Temperature Range          **0℃/*4°F to *0℃/**8°F

Compressed Air Input Range              *****5PSI/***0bar /*******0kPa

Compressed Air Input Flow                 **0L/min (*7.0cfm)

Nitrogen Purity                                         ****9+%

Nitrogen Output                                        *8L/min (*)@********************/p>

Absorption pressure

Maximum Nitrogen Pressure in Tank **2PSI/7bar/**0kPa

ST**6N Specifications:

1. Generates nitrogen from your compressed air

2. 2 Pre-Filters

3. *0L/*3.2gal (us) internal nitrogen storage tank

4. Auto-start inflation

5. Remain at last setting

6. Audible and visual end of the cycle signal indicators

7. LED display

8. 1 Nos.**0m/*2.8ft standard hose with single clip-on open tyre chuck

9. Nitrogen purity test port

*0. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun

*1. To increase the tyre nitrogen purity, the valve core must be removed manually and allow all the air to escape from the tyre. Before inflate tyre with nitrogen, firstly the unit will pump the residualair from the tyre by the internal vacuum generator then inflate nitrogen to the target tyre pressure

ST**6N Operation Steps:

1. Set final target pressure using the + and – s.

The upper LED screen will show the target pressure.

2. Remove the tyre valve core to exhaust the residual air from the tyre, then re-fit the tyre valve core.

3. Connect air hose to tyre valve stem.

4. Press “START” key.

5. When unit “beeps” and the upper LED screen flashes “END”, tyre inflation is complete.