タイトルまたは説明

Stainless Steel Dome Head Blind Rivets

Material: Stainless Steel **4 or Stainless Steel **6
Head: Dome Head, Flange Head
Type: Open End
 

Blind Rivets are high strength one piece break-stem fastener that require access from one side only. They are available in various materials such as Aluminum alloy, Steel and Stainless Steel in a variety of lengths & diameters. Also they are available in various head forms - Dome Head, Countersunk and Large flange to suite applications where wide load spread or flush surface is required. 

A general purpose rivet that can be used where the materials to be fastened does not require load bearings.Open-end blind rivets provide an economical means for fastening metal parts where easy disassembly is not required. The bodies of all our open-end blind rivets are fabricated by cold-heading, offering superior strength and excellent appearance.

Rivets can be used in numerous applications with low load bearing applications. Rivets are handy where access at the back of the work piece is restricted or not accessible.

The standard head style is dome which is suitable for most applications,

large flange rivets are good for riveting thin or softer materials such as plastic, timber etc to a rigid backing,such as fastening softer materials (wood or plastic, for example) to metal.

A countersunk rivet is used primarily on metal surfaces where a flush appearance is required.

These bigger stainless steel rivets are much stronger than aluminum pop rivets.  
Unlike regular steel rivets, they won't rust or corrode.
Best quality: stainless rivet with a stainless mandrel.

Stainless steel rivets usually refer to the steel which has resistance ability of the air, water, acid, alkali salts or other media corrosion. Depending on the alloy composition, it respectively focuses on rust resistance and acid resistance.