タイトルまたは説明

Iiis a kind of downhole tools which is pumping well anti-abrasion, it is especially suitable for pumping well and directional well whcih above of sucker rod middle point,under the middle point of sucker rod , the rod body with nylon centralizer is works better.

 

It moves up and down in the tubing, due to the elastic deformation of sucker rod, rod and oil tube wall is easy to make friction, ti makes sucker rod break off easily, sucker rod centralizer has strong flexibility, touched with the tubing wall can reduce the friction of rod and tube, and can be increase production life of pumping unit. The centralizer is connected with sucker rod , the outsid diameter of centralizer is bigger than coupling outer diameter,so that can make the function of centralize. The centralizer is made of high strength wear-resistant material, and touched with the tubing to reduce the abrasion to achieve the purpose of anti-abrasion.





CHEMICAL COMPOSITION

Process Sucker Rod Centralize:

1.Precondition: To ensure that the temperature of the workshop is not less than **0℃.

2.Drying: the raw material is dried in **0℃ hot air, making its humidity less than 0.1%.

3.Equipment debugging: power and water supply of equipment,then install the mould, cleaning equipment and raw material barrel.

4.Raw material melt: the melting temperature of HTN*1G*5HSLR.

5.Mold temperature: the mold temperature of the processed HTN*1G*5HSLR material is **5℃, and the mold temperature of the processed HTN*3G*0HSLR is **0℃.

6.Processing: the nozzle temperature is **0℃, plasticizing area one temperature is **5℃,plasticizing area two temperature is **5℃, plasticizing area three temperature is **0℃, injection pressure is **0 bar, flow is *0 cc/min.

7.After the first product is produced, it will be testing the size, and the batch production will be start after the testing.