タイトルまたは説明
ALTOCAST
AND ALTOSPLINT
1) ALTOCAST
ALTOCAST™is
composed of knitted fiberglass (or polyester) fabric impregnated
with a water activated polyurethane resin. The setting time is
approximately 4 minutes and it takes *0 minutes for full
weight bearing. ALTOCAST has been introduced whole world and
it brought us good reputation as a valuable products. It’s a
substitution of “Plaster of Paris” or “ Plaster Bandage”.
ALTOCAST™ is intended for use in the construction of most common
orthopedic cast applications, as well as specialized orthotics
and prosthetics devices. Specific application suitability should
be the responsibility of a qualified, on-site medical
professional. Construct cast by wrapping rolls in a spiral
manner, overlapping previous layers by one half or two thirds the
width of the roll being used.
1. CONFORMABILITY AND MOULDABILITY
ï¬ ideal structure of Fiberglass knitted tape
ï¬ multi-directional stretch(length, cross and diagonal
way)
ï¬ bony prominences such as joints, elbows, ankles, heels,
etc.
2. RADIOLUCENCY
ï¬ Excellent X-ray translucency
ï¬ Fiberglass X-ray translucency
3. BETTER SANITATION
ï¬ Moisture resistance.
ï¬ Easy to dry
ï¬ Prevents bad odors, skin contagions or other
complications.
4. ECO
FRIENDLY
5. No-End Edge Problem
ï¬ ALTOCAST was designed considering physicians
attitude.
ï¬ Save time and effort.
2) ALTOSPLINT
ALTOSPLINT™ is intended for
the emergency and temporary use in the immobilization of
fractures, joints, post-operation or strains and sprains.
Specific application suitability should be the responsibility of
a qualified, on-site medical professional. ALTOSPLINT™ is a
synthetic orthopedic product. Its outside pads are polyester
non-woven fabric for cushioning and the inside is non-woven
or fiberglass or polyester substrate impregnated with
water-activated polyurethane resin for weight bearing. Exposure
to any moisture will cause the tape to harden and become rigid.
The setting time for this product is approximately 4 minutes and
may be *0 minutes after setting for weight
bearing.
1. NEAT
APPEARANCE
Side of ALTOSPLINT™ pad is sealed by ultrasonic wave to give
neater and smarter appearance than conventional sealing methods
such as sewing or gluing methods.
2. STRENGTH
ALTOSPLINT™ has superior strength than generally required for
SPLINTs.
3. MOULDUABILITY
ALTOSPLINT™ is very easy to shape the contours of the human
body,especially bony
prominences such as joints, elbows, ankles and heels.
4. Superb
X-ray permeability
ALTOSPLINT has superb X-ray
permeability, which allows taking X-ray with the splint.
5. VARIETY
OF SIZES
ALTOSPLINT™ provides 5 and 9 different sizes in Roll Type and One
Step Type respectively.ALTOSPLINT Roll type is economical since you
can cut the roll as long as you required.
ALTOSPLINT Pre-cut type is simple
to use since it has various lengths.
6. NO-NEEDLE
SPROUTING PROBLEM
When fiberglass was cutting, Some
other fiberglass wouldl be sprouted up and became painful
needles. However ALTOCHEM fiberglass has treated unique heat
treatment, It does not leave any of hazard
| 国: |
South Korea |
| モデル番号: |
Synthetic orthopedic casting tape and splint
|
| 离岸价格: |
1.35 ~ 2.55 / Roll ( Negotiable ) （交渉可能）
Get Latest Price
|
| ロケーション: |
Made in Korea |
| 最低注文量の価格: |
1.35 per Roll |
| 最低注文量: |
2000 Roll |
| パッケージの詳細: |
Export standard package |
| 納期: |
Within 4 weeks after payment |
| 供給能力: |
3000 Roll per Day |
| 支払いタイプ: |
T/T, L/C |
| 製品グループ : |
- |
