TERMIYES

タイトルまたは説明

TERMIYES

Finishing gypsum

Special finishing gypsum is classified as C6. It complies with the standard UNE-EN *3.****1: ***6 and RD ***0 / ***9 (CE marking).

Comfort

Fire protection

Acoustic insulator

Thermal insulator

Lightness

Whiteness

Factory and offices

REGULATION AND STANDARDS

Special finishing gypsum is classified as C6. It complies with the standard UNE-EN *3.****1: ***6 and RD ***0 / ***9 (CE marking).

DESCRIPTION

Hand applied gypsum for interior; it is indicated for the plaster of special and mechanized gypsum, as well as termination of plaster walls, or ceramic coated with gypsum or plaster.

TECHCNICAL CHARACTERISTIQUES

1.- Water / gypsum relationship recommended: (0,*5)

2.- Fineness of grind: ≤ 2% retained on **0 micron sieve

3.- Purity index sieve: ≥ *0%

4.-Combined water: 3.**4.5%

5.- It has an approximate workability of two hours, depending on the conditions of kneading. Good sliding. It doesn’t repels and the surface results very fine and brilliant.

Methods of test carried out according to the standards UNE **2.**1 and **2.**2.

6.- Setting times may vary depending on the relationship water/gypsum, temperature, water pH, type support, time and speed of the shake.

** Note:

Methods of test carried out according to the standards UNE **2.**1 and **2.**2.

Setting time,application, hardening

EMPLPOYMENT MODE RECOMMENDED

1.- Sprinkle the product slowly until the water is covered completely (to saturation). Let stand 3 to 5 minutes and then knead with the help of a mechanical blender until a smooth dense aspect and without lumps.

 2.- Apply with a trowel, from one to three layers depending on the finished level required.

3.- For correct grip, it is important that the finishing layer has to be apllied before the first layer has hardened completely.

4.- Additives should not be added; it may be a change in the setting process and the final strength of the product.

5.- The ornaments must be clean and free of fluorescens and salitres for a perfect grip.

6.- It is necessary to use clean water with a temperature between 5 ° C and *0 ° C.

7.- It is necessary to keep an optimal ventilation for a successful process of drying

PRESENTATION AND STORAGE

The product is sold in bags of brown paper double-bladed, with signage of pink with a content of *5 kg. (±5%).

The storage of this product should be in dry places temperature to preserve its properties.