Thermostatic Mixing Valve (BXHS20M)

タイトルまたは説明

Body: DZR Brass with nickel plated
Shutter: PPO
Springs: Stainless steel
Seals: Silastic
Temperature setting range: ****5 C
Hot water inlet temperature range: Below *5
Cold water inlet temperature range: ***9 C
Maximum working temperature ≤ *9 C
Temperature stability: +/*2 C
Hydrostatic pressure: *0bar
Max working pressure(dynamic): 5bar
Working pressure: 0.***1Mpa
Ideal working pressure: 0.**0.5Mpa
Connections: BSP, 3/4", Inlets: M, Outlet: M
Flow rate(1 kg pressure drop): *6.*7 L/min
One way valves: Tow inlets have one way valves

Flow Rate test based on corresponding Pressure Drop
Pressure
(psi or kPa) 1 psi
5 psi
(*4kPa) *0 psi
(*9kPa) *5 psi
(**3kPa) *0 psi
(**8kPa) *0 psi
(**7kPa)
Flow Rate
(liters per minute) 7.2 *5.8 *1.5 *5 *8 *5
GPM 1.6 3.5 4.7 5.5 6.*6 7.7

Package: 
Inner Carton: **0**7**2mm, 1 PCS per CTN. 
Master Carton: **0***5***0mm, *0 PCS per CTN
N. W/PC: 0.5kg
G. W/Inner CTN: 0.6kg

Product Introduction
A Thermostatic Mixing Valve (TMV) is a valve that blends hot water (stored at temperature high enough to kill bacterial) with cold water to ensure constant and safe outlet temperature preventing scalding. 
TMVs are used in solar heater system to avoid scalding due to sudden spouted hot water. 
They outputs comfortable water of constant temperature and accurately control water temperature for bathing, showering and hand-washing. They maintain pre-set temperature, even if water pressure varies when other appliances are used. TMVs can be fitted under basins and bathtubs and be part of shower fittings, or as a fixture of an exposed hot and cold water mixer. 

When the hot water failed, the cold inlet port will close automatically. 
When the cold failed, the hot will close too. 
When the hot water temp reduces below the set temp, the cold flow will stop and hot water continues.