thernet fiber switch with 24 SFP ports

タイトルまたは説明

Application
Workgroup Switch
With *4 **0Mbps SFP ports and up to 2 Gigabit Ethernet Combo ports, the SWM***2FF-BA provides a cost-effective, high-performance solution for power users.
Department Switch
The SWM***2FF-BA can easily build a local, high bandwidth Fast Ethernet network for backbone of your department by performing 8.8Gigabits per second, non-blocking switch fabric. With the two built-in SFP ports, the SWM***2FF-BA provides the uplink to the backbone network through Gigabit Ethernet LX/SX SFP modules.
Key Features
Physical Port
•*4 x **0Base-FX Fast Ethernet ports
•2 x ***0Base-X SFP slots, shared with Port**5 and Port**6
Layer 2 Features
•Auto-MDI/MDI-X detection on  RJ**5 port（*5、*6 ports）
•Prevents packet loss with back pressure (half-duplex) and IEEE **2.3x PAUSE frame flow control(full-duplex)
•High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
•Supports VLAN
　–IEEE **2.1Q Tag-Based VLAN
　–Port-Based VLAN
　–MTU VLAN (Multi-Tenant Unit VLAN)
•Supports Spanning Tree Protocol
　–STP, IEEE**2.1D (Classic Spanning Tree Protocol)
　–RSTP, IEEE**2.1W (Rapid Spanning Tree Protocol)
　–LoopbackDetection
•Supports Link Aggregation
　–up to 3 trunk groups
　–up to 4 Fast Ethernet ports or 2 Gigabit ports per trunk group
　–IEEE **2.3ad LACP (Link Aggregation Control Protocol)
　–Cisco ether-channel (Static Trunk)
•Port Mirroring to monitor the incoming or outgoing traffic on a particular port
Quality of Service
•2 priority queues on all Switch ports
•Traffic classification
　–Port-Based priority
　–IEEE **2.1p based priority
　–IP TOS / DSCP based priority
　–TCP / UDP Port-Based QoS
•Strict priority and Weighted Round Robin (WRR) CoS policies
•In/Out rate limit control on each port
•Broadcast Storm Control support
Multicast
•Supports IGMP Snooping v1 and v2
Security
•MAC address filter
•TCP & UDP filter on each port
•Management idle time security
SWM***2FF-BA Series
 
Management
•Remote Web interface for Switch management and setup
•Supports SNMP v1
•Supports DHCP Option *2 and DHCP Relay
•Firmware upgrade through Web interface
•Configuration upload / download through Web interface
•Reset for system reboot or reset to factory default