タイトルまたは説明
Dual axis Pole solar tracker :
1) Both elevation and azimuth have slewing
driver, not linear actuator for elevation
2) The max power output of tracker
can reach *0KW
3) More steel is used, the weight of
normal tracker (*0panels) is about **0kgs or below, ours can reach
***0kgs, it will make the whole tracker
more wind resistant and stronger, wind loading is *7m/s
4) The design is unique and simple, there
are two kind of mounting: flat plate and double layer
5) Light sensor control and time control
together
6) Lower noise to avoid affecting
resident
Standard solar panel:
1)***0***8mm
2)***0***2mm
3)***6***2mm
Structure material : Hot dipped galvanized steel
Max module power:*0KW
Net rack area:*0~*0sqm
Tracking technology: programmable logic controller(PLC)
astronomical program,adding light sensor controlling,
tracking accuracy can reach ≤1°
Wind protection system: Wind sensor , Working wind speed:
*7m/s .automactic horizontal positioning at wind speed greater than
*7m/ph
Foundation: steel cage with reinforced concrete, drawing will
be as reference
Tracking axis: 2 axes: azimuth and vertical
Power of motor: *0W*2
Angles of rotation:azimuth:***0 to **0 vertical:*0 to *0
Power supply to motor: **0V to **0V 3 phase,****0HZ depending
on location(US, Europe ect.)
Power consumption :0.5kwh/day
Working temperature:**5C to **5C
Design lifetime : *5 years above for Mechanical part,3 years
above for motor
Automation: independent PLC on each tracker with possible
interconnection and remote control(optional)
Bearing and turn regulation: Motorized bearing for azimuth and
vertical tracking activated by planetary gear reducer
Article from wikipedia
Tip-tilt dual axis tracker (TTDAT)
A tip-tilt dual axis tracker is so-named because the panel
array is mounted on the tip of a long pole. Normally the east-west
movement is driven by rotating the array around the top of the
pole. On top of the rotating bearing is a T- or H-shaped mechanism
that provides vertical rotation of the panels and provides the main
mounting points for the array. The posts at either end of the
primary axis of rotation of a tip–tilt dual axis tracker can be
shared between trackers to lower installation costs.
Field layouts with tip-tilt dual axis trackers are very
flexible. The simple geometry means that keeping the axes of
rotation parallel to one another is all that is required for
appropriately positioning the trackers with respect to one another.
Normally the trackers would have to be positioned at fairly low
density in order to avoid one tracker casting a shadow on others
when the sun is low in the sky. Tip-tilt trackers can make up for
this by tilting closer to horizontal to minimize up-sun shading and
therefore maximize the total power being collected.
The axes of rotation of tip-tilt dual axis trackers are
typically aligned either along a true north meridian or an east
west line of latitude. It is possible to align them in any cardinal
direction with advanced tracking algorithms.
| 国: |
China |
| モデル番号: |
CGPT-DAT
|
| 离岸价格: |
( Negotiable ) （交渉可能）
Get Latest Price
|
| ロケーション: |
China |
| 最低注文量の価格: |
- |
| 最低注文量: |
1 Set |
| パッケージの詳細: |
others |
| 納期: |
40 days |
| 供給能力: |
100 Set per Year |
| 支払いタイプ: |
Western Union, T/T |
| 製品グループ : |
solar solution
|
