タイトルまたは説明

Stereolithography (SLA) models offer the most accurate type of fit/form prototype for the verification of any design before committing to your chosen production route. Its high accuracy and good surface finish makes it the preferred choice for designer models, engineering verification and master patterns for silicone rubber molds. 
An Ultra Violet (UV) laser beam is directed by a computer guided mirror onto the surface of the UV photopolymer resin. The model is built one layer at a time from supplied 3D CAD data. 
The laser beam traces the boundaries and fills in a two-dimensional cross section of the model, solidifying the resin wherever it touches. Each successive layer is applied by submersion of the build platform into the resin as the part gradually develops and the platform descends into the liquid resin. 
Once the model is complete, the platform rises out of the vat and the excess resin is drained. After curing SLA parts are then ready for post processing as required by the specific application. 
Minimum Thickness: 0.**5mm (and FORM1 is exactly the same precision parameter)
Size: **0 x **0 x **0mm 
Build Size: **8 x **8 x **0mm (actual height is greater than **0mm, less than **0mm) 
Environmental Requirements: Room temperature of at least *0 degrees in an office environment and away from direct sunlight 
Photosensitive Resin: 3% shrinkage, eight thousandths shrinkage, class ABS resin 
Slice Software: TMTCTW automatic encryption support manually add U Shield 
Input formats: STL OBJ TMTCTW FORM
Printing Material: UV Resin
Fluid Bath Service Time: ****0 times (Quartz Bath Optical)
Optical Service Time: ***0hrs