タイトルまたは説明
TOP****0B banner
welding machine with Higher Quality
TOP****0B banner
welding machine with Higher Quality
1.Introduction:
Thank you very much for choosing our Automatic TOP***0C Hot Air
Welder. We believe that this will be your best choice for your
business. This equipment is designed professionally for seaming PE
, PVC and painting banners.
To help you understand the characters features of this equipment
and know how to operate safely and keep in good condition etc. We
give you THE MANUAL OF INSTRODUCTIONS for your reference. Although
the machine is produced well and passed the strict quality
examination in our factory before we deliver the machine to you,
the effects of the function will be absolutely caused by the
improper operation or without complete maintenance. For the reason
of safety and the excellent performance of the machine, please read
and follow the directions before operation. Please keep in mind
that all the danger would be caused by carelessness and not reading
the manual carefully.
2.General instruction for safety:
Warning: The basic principal of safe protection should be followed
to reduce the danger of fire in disaster, electric shock and
personal harm. Please pay attention to the following items
carefully before operation.
1.Keep the working place clean. Messing up and the disorderly
working place cause disaster
2.Choose the work place carefully and use the machine in a bright
and dry circumstance.
3.The electricity, controlling box and protective facilities have
to be in the proper order after finishing daily work. The
electrical power supply has to be switched off definitely.
4.The machine has to be stopped before gets maintenance or
replacing the parts.
5.Use standard or indicated tools when dismantling or replacing
parts.
6.For safety and the long life of the machine, please do not let
the machine operates overtime.
7.If any special incidents happened, please stop the machine first
for repairing, And do not deal with the special incident with
improper procedures.
8. If the machine is operated on land, keep the work place clean
and no dust there. If dust or something blocks the inhaling filter
of heater, the heating wind can not come cut adequately and then
temperature inside of filter will rise to let the heater burn
down.
Tips:For first user,we can use waste banner to test and find proper
temperature,we can do like this:take a small banner close the
nozzle,if the banner hot melt quickly,it means,the temperature is
OK,it not strong or burnt,we can increase or reduce temperature.we
can also write down the temperature for this thickness of banner as
sample.in next welding,based on this temperature.we just need to
increase or reduce the temperature depends on thickness of
banners.check the welding result:
3.Moving,Dismantlement,Installation,Cleaning:
1. Any part of this machine being bumped of fallen can cause some
damage impossible to be repaired.So please pay attention to carry
it.It is suggested to move the machine by manpower and put it down
carefully.
2. Please check if there is damage or missed parts after unpack the
machine.Any problem, please contact us or the local agent
immediately.
3. The place for installation must be flat and the floor is strong
enough to support the machine and moreover, the installation place
should close to power supply.
4. Keep the installation place no dust and avoiding
sunshine.
5. Please sweep away the anti-rust oil from the machine with
detergent and re-lubricate with light lubricating oil after
installation.
4. Connecting the power supply:
Connecting the electric wire to the reserved plug(AC**0V)of
controlling box.
5 notice:
1. During operating, if the surface cloth is dissolved and scorched
or the cloth are not sticked together, please stop to adjust the
temperature or speed.
2. During operating,if the seaming part is not in right position,
please stop to adjust fixing position.
3. During operating, make sure clothes are flat so that stick
together smoothly.
4. The hot wind of heater cannot touch the press-wheel or the
rubber of press-wheel is easy to be burned down.
5. Adjust temperature to zero before turn off the heater.Switch off
after ***0 minutes.
6 Maintenance:
Take care the nozzle.Use brush to clean if there is dust or block
in the nozzle or filter.
7.Specification:
Electric heating:***0W
Motor:*5w
Voltage:**0V/**0V
Frequency:*0/*0HZ
Temperature scope:*****0 Degree
The thickness of material to be weld:0.**2mm.
Welding Area:**4cm
Working Temperature:**0degree(normally)
Specification: L:*0cm, W:*0cm, H:*8cm
Net weight:*0kg
Gross Weight:*4kg
Packing size:*8**7**0cm
Package: Hard Aluminum with carton outside
国: |
China |
モデル番号: |
Top-2000B
|
离岸价格: |
1268 ~ 1335 / Set ( Negotiable ) (交渉可能)
Get Latest Price
|
ロケーション: |
- |
最低注文量の価格: |
1268 per Set |
最低注文量: |
1 Set |
パッケージの詳細: |
wooden package |
納期: |
1-3working days after check youe payment |
供給能力: |
999 Set per Month |
支払いタイプ: |
T/T, L/C, D/A, D/P, Western Union, Money Gram |
製品グループ : |
Welder machine
|