Traxxas E-Revo Brushless Monster Truck RTR with 2x Batteries

Features:

Castle Creations Mamba Monster ESC
Castle Creations Mamba Monster ***0KV Motor
NEW Traxxas TQ 2.4GHz High Output Radio with Traxxas Link
Up to *5.2 Volts of Massive Brushless Power
State-of-the-Art Integrated Chassis Design
Heavy-Duty *7mm Splined Aluminum Hex Hubs and Wheel Nuts
Hard-Anodized Teflon-Coated Aluminum Shocks
Speed control hold-down securely attaches to the chassis
Traxxas Power Cell Batteries Included
Integrated dual battery compartments with quick release battery doors
Scalable battery compartments from sport packs to brutal 6S Lipo power
Dual digital waterproof steering servos deliver **5oz-in of torque & 0.**-sec transit time
Hard-anodized Teflon-coated shock bodies with TiN coated shock shafts
Sealed pivot ball suspension
Sealed limited slip differentials
Hex hardware throughout
Talon tires on 3.8" black chrome Gemini wheels
Rated for 6S LiPo operation
Low-voltage detection for LiPo use
6.5mm gold-plated bullet connectors
Castle Link compatible for tuning via computer using USB cable
5mm rotor shaft
Top Speed: *5+mph All-Out, *0+mph Out of the Box!
The E-Revo is the benchmark that could only come from Traxxas, the leaders in innovation and design.
The Traxxas E-Revo Monster Truck RTR was designed to be Brushless Ready. Now, with the help of Castle Creations, the E-Revo is officially brushless equipped. Power-hungry electric monster truck racers can purchase the ground-breaking Traxxas E-Revo complete with a factory-installed and programmed Castle Creations Mamba Monster system. This heavy-duty setup includes Castles ***0kV motor for full 6S LiPo (*5.2 volts max) compatibility, which gives E-Revo the ability to exceed *0mph with wheel-lifting torque and brutally quick acceleration. 

The Mamba Monster controller features a cooling fan and heavy-duty construction with oversized 6.5mm connectors while the motor uses a 5mm rotor shaft for added durability. Secure mounting keeps the ESC and on/off switch in place without relying on servo tape. The Traxxas E-Revo requires no modifications to handle the extra power; all of the drivetrain and transmission components were designed from the start for exactly this type of high-amp, high-rpm horsepower. 

Super-Duty Revo driveshafts, torque-control slipper clutch, an oversized steel idler gear and rubber sealed bearings are just a few of the features that make the Traxxas E-Revo ready for all the horsepower you can handle. Also new on the Traxxas E-Revo Brushless Edition is the TQ 2.4Ghz radio system that practically eliminates frequency conflicts while delivering the long range and reliability you expect from Traxxas.

Requires: 
Transmitter Batteries: Eight AA
Charger: NiMH compatible, high-current connector adapter is required if using Duratrax Onyx charger listed in Accessory Completion Guide.

Type: 4WD Off road
Scale: 1/*0
Length: *2.*1 inches (**2mm)
Width: *6.*8 inches (**6mm)
Wheelbase: *4.1 inches (**8mm)
Weight: **5oz (3.*2kg)
Chassis: Molded Composite Nylon Tub
Suspension: Advanced Suspension Design
Drivetrain: Shaft-Driven 4WD
Tire Type: Talon™ (5.*5" x 3.8")
Motor or Engine: Castle Creations Mamba Monster ***0Kv
Speed Control: Castle Creations Mamba Monster Forward/Reverse/Brake
Radio: Traxxas TQ 2.4GHz
Batteries: Two NiCad or NiMH (stick)7.2V or 8.4V (6 or 7 Cell)
Speed: *5+mph (*5+mph w/ LiPo Battery)
Gear Pitch: **-Pitch
Wheel Size: 3.8" Gemini™ (black-chrome) with *7mm splined hex
Kit/RTR: RTR
Shock Type: precision aluminum shocks
Body: ProGraphix
Ball Bearings: Rubber Sealed Bearings