タイトルまたは説明

XK***0rollmillrubber mixer(withstop blender)
1. Working conditions
1.1 Application: used to output the rubber sheet.
1.2 Equipment application environment: the maximum temperature of *0°C, the lowest temperature of 5°C; relative humidity up to *5%.
1.3 Power Supply: AC**0/AC**0, *0Hz; the production water pressure 0.4 MPa.
2  machine consist of :
2.1 roller                        2  sets
2.2 gap adjust device              2 sets
2.3 Safety device                 1 set
2.5 reducer device                1 set
2.6  rack 2                      2 sets
2.7  bed plate                   1 set
2.8 lubrication system              1 set
2.9 heating and cooling device       1 set
2.*0 electronic control system        1 set
2.*1 rubber stop blender device       1 set
2.*2 electro-hydraulic brake system    1 set
2.*3 Frequency converter (Schneider)  1 set
3 The main technical parameters
3.1 drive direction                 right direction
3.2 capacity for a batch (one time)    *5kg (specific gravity 1.*5)
3.3 roller structure :               smooth and hollowed
3.4 roller size                   Φ**0×***0mm
3.5 linear speed of the front roller    3~*8m/min (for option), the roller speed ratio 1:1.2
                               (variable speed)
3.6 Main motor power rating        AC**0kW
3.7 Gap adjust device              two gap adjust motor
       Power                      2 x 3kW
       Speed​​                     ~~ *0mm/min
       Gap adjust scop              from 0.5 to *5 mm
3.8 roller security pressure         ***0±**0kN
3.9 rubber stop blender device
        The traction roller power       4kW
        The traction roller speed        *6m/min
        Swing roller power            1.5kW
        Oscillating frequency          5.6 times / min
        Swings range                ***0mm
3.*0 Cooling water consumption     *5m3 / h
3.*1 Dimensions                  ~ ***0×***0×***0mm
3.*2 weight                       ~~ *4t
3.*3 Distribution of total power      **0kW
4.  main structural instruction
4.1the bed plate is thewelded structure, annealed;
4.2drivenmotoris thethree-phase asynchronous motor;
4.3 Transmission type: driven by the motor through a reducer, anddrive double roller rotation;
4.4both the two rollers are the smooth and hollowed structure, made of chilled alloy cast iron, theworkingsurface hardness HS*0±2;
4.5thebearingisthe rolling bearing; lubricationbygrease,equipped with themanually pump.
4.6 EMERGENCY STOP braking apparatusis the electro-hydraulic brake system for braking, after the braking, therollersrotation is not of exceeding in the whole 1/6circle. And after stop, within2Sthe rollers willautomatically Inversion, the anglescopein the *0 ~~ *0 degrees .
4.7roller gap adjust type is: motor driven;
4.8 emergency stop device:around the rack, equipwith a total of four emergency stop ;
4.9 equipped with the manually cutter(movetype) two pieces
4.*0 electric control design principlesis strictly according to the technical specifications of theroll mill of rubber mixer, and using the advanced electrical components, easy to operate, reliable, fully meet the control requirements of the machine.