タイトルまたは説明

UL SAA, IP*5 **0w Led High Bay Light- **0lm/w, Copper Heat pipe, Meanwell Driver


Specification:

Item Number: LY-HBL***0W-Z*5A / LY-HBL***0W-Z**0A

Power: **0W

Power Factor: more than0.*7

Input Voltage:  AC *****5V

Frequency Range:  *0Hz / *0Hz

Color Rendering Index: more than *5

Beam Angle:  *5 degree or **0 degree

Color Temperature:  ********0K  or ********0K

Luminous Efficiency :**0 lm/w

Lamp Lumen Output : ****2 lm

LED Brand:CREE XP-G: **0pcs

Power Supply Brand:MEAN-WELL 2*HLG***0H**6A

IP Grade: IP*5

Warranty:  **5 years

Application:

1. Factory   2. warehouse  
                   
3. workshop   4. storehouse  
                   
5. hangar   6. gym, stadium, exhibition hall 
                  
7. gas station, toll station 
                   
8. Parking garage  9. mall   etc.

 

CE(EMC/LVD), RoHS, FCC, C-tick, SAA available.

Contact: sales (at) liangyangtech (dot) com

Attention:

1. It is forbidden to squeeze the top of the lamp, so as not to damage

the lamp shade.

2. Yellow green line to protect the earth, the rest two for ac

power cord.

3.  When installation, hanging ring must be tight, in case lead to the lamp body fall off

4. Because this product uses the heat pipe thermal conductivity, so it

is strictly prohibited collision fall

5.  When installing a lampshade, hang up the screws on the

composite.aluminum plate suspended within **3 mm

6 .  Install the lamp shade on the aluminum plate, screw

corresponding with hole , then clockwise rotating lamp shade, Let the

nut into the chimney hole and lock it

7 As LED high bay use heat pipe technology , lamp must be hang

perpendicular to the ground, deflection Angle is not greater than *5

degrees. the wire rope on heat sink is used to protect lamp body, to

prevent fall off. The rope must be connected to the fixed building can

bearing, to avoid lamp body  fall off lead to goods damaged or personnel  injury.


UL SAA, IP*5 **0w Led High Bay Light- **0lm/w, Copper Heat pipe, Meanwell Driver