タイトルまたは説明

1. Structural material design - power saving, fast speed and low malfunction rate.
The worktable of our laminating machine is welded without welding, and it is bonded by high temperature resistant structural adhesive with high strength. Many manufacturers' workbenches are welded, which will cause uneven products.
 
The material of our sealing strip is silicone, which has long life, anti-aging and good sealing performance. At present, most manufacturers use nitrile rubber, which will become hard and dry after long-term use, resulting in poor sealing performance.
 
2. Intelligence
The height and temperature of the heating chamber are intelligently matched according to the thickness of the film. Its not easy to break the film, nor easy to change color
 
3. Heating tube
Our heating pipe installation design is different from other manufacturers. Other manufacturers are currently parallel to the feeding and discharging direction, which will cause a problem that the film-coated sheets on the outermost sides are not uniformly heated.
The design of our machine improves the problem. The heating tube is perpendicular to the incoming and outgoing materials, and the heating of the entire heating chamber is uniform. And it can be heated according to the number of sub-regions of the processed plate, which greatly saves electricity.
Maintenance: The heating tube parallel to the feeding and discharging direction requires workers go into the heating bin for maintenance of the heating tubes, which is extremely inconvenient. Our ***0D can be repaired and replaced on the outside of the machine.
 
4.Different from other manufacturers, our machine uses high and low pressure. Under the low pressure environment, the film is slowly stretched and wrapped around the sheet, so that the side of the sheet will not break the film due to improper pressure. The original color of the film is also maintained. Then it is automatically converted into high pressure, the film on the surface is completely adsorbed on the plate.
 
5. Many manufacturers currently use traditional manual frame pressing, we use automatic frame pressing and automatic locking. Save time and labor.