VAG Vehicle Diagnostic Interface VVDI

タイトルまたは説明

VAG Vehicle Diagnostic Interface VVDI

VAG Vehicle Diagnostic Interface VVDI Newest update:
1. Support NEC *4C*2 change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
2. Support GOLF5 MM7(9S*2) change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
3. Add TA special chip pre-program. Directly pre-program ID*8 to TA2,TA3, TA4, TA5 chips.
 Attention: IMMO PLUS 2.0 software and VAG Commander software can use VVDI hardware together, but previous VVDI customer need update hardware then can support IMMO Plus software.

Function:
1) Extracting security access codes (PIN) by OBDII
2) Programming keys by OBDII. Preparation of dealer's keys.
3) Mileage recalibration by OBDII
4) Clearing crash data DTCs by OBDII
5) Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6) Exchange speed limit of MMI-TV system

1.Standard diagnostic functions:
1) Connect to the device using KWP***0 over TP2.0, KWP***0 over TP1.6, UDS over ISO transport protocol (CAN), KWP***1 or KWP***0 over K-Line
2) For all electronic control units reading identification data
3) For all electronic control units read error (DTCs)
4) For all electronic control units clear error (DTCs)
5) Scan all units
6) Broadcast requests
7) Measured values
8) Adaptation

2.Special functions:
1) Instrument CAN
(1) With this function you can establish diagnostic session with the Instrument cluster using KWP***0 over TP2.0
(2) You can read current odometer value
(3) You can change odometer value
(4) Added support for VDO Instrument Cluster ***6+
(5) Read/Program memory of instrument cluster immobilizer
(6) Reading security access code of the IMMOBILIZER
(7) Read/Write immobilizer related data
2) EZS - Kessy (Q7/A6/Allroad)
(1) With this function you can prepare dealer key/learn dealer key
(2) Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)
3) Instrument K-Line
(1) With this function you can establish diagnostic session with the Instrument cluster via K-Line (KWP***1 or KWP***0)
(2) You can Read/Change odometer value
(3) Read PIN code
(4) Read/Write eeprom
(5) Read ROM/Flash from the Instrument cluster
4) Engine Control Unit
(1) Read EDC*7/MED*7 flash memory
(2) Read/Write of flash memory (EDC*5, EDC*6 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of checksums while programming, ME7.1.1, MED9.x, ME7.5)
(3) Read/Write flash counters (EDC*6)
(4) Read/Write eeprom (VAG-EDC*5x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
(5) Extracting Security access code / PIN (EDC*5, ME7.x, VAG-Cartronic ME7.8, EDC*6, EDC*7, MED9.x, Simos PPD)
(6) Extracting Component security bytes (EDC*5, ME7.x, VAG-Cartronic ME7.8, EDC*6, MED*7.5.1, MED 9.x, Simos PPD)
(7) Enable/Disable immobilizer (EDC*5, ME7.x, EDC*6)
(8) Odometer correction (EDC*5, EDC*6)
5) Kessy adaptation
This function can be used for adaptation of brand new kessy units to the car. This adaptation can be by CAN TP2.0, K-KWP***0 and also can be used with Porsche Cayenne.
6) TV activation ED1/ED2
(1) Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF
7) Key learning
With this function you can learn key/transponder to the vehicle
8) Dump tool
With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the corresponding unit
9) Airbag
With this special function you can Read/Write EEPROM memory of the airbag module
Clear the crash data of the airbag module
*0) Custom Read/Write
Using this application you can read/program memory in some electronic control unit
*1) PIN Convertor
*2) Service interval
Using this function you can perform reset of the service reminder, reset of the service interval parameters or change service interval options
*3) Remote control adaptation
Using this application, you can learn remote controls
*4) Navigation
Using this application, you can enable/disable the “Eject” of the “Navigation” system
*5) Cruise control system
Using this application, you can activate/deactivate a cruise control system and change the related
steering wheel electronics( SWE) configuration if SWE unit is available