タイトルまたは説明
Brief
introduction
PCL Upright shaft impact crusher
is a new type crushing equipment developed in line with theory of
Barmac impact crusher by our technical department, which has many
years experience developing powder equipment. It can be applied in
fine crushing of all kinds of ores, and has replaced traditional
equipment, such as hammer breaker, roll crusher and rod mill. Under
the circumstance of China promoting comprehensive riverway
treatment, shorter and shorter sand resource, and stronger and
stronger environment protection consciousness, PCL Upright shaft
impact crusher has become mainstream equipment in sand making
industry.
Work principle
PCL Upright shaft impact crusher
is composed of feed bin, distributor, swirl crushing cavity,
impeller, main shaft assembly, base, gearing device and electric
engine. Its work principle: material enters crusher by feed bin,
and is divided into two parts by distributors; part of it through
space between distributors enters impeller rotating at high speed,
which may reach several hundred times of acceleration of gravity,
and is cast out from interval channel around impeller at the speed
of ****5m/s; firstly it is crushed with some material free fallen
around distributors, then stricken to lining plate of swirl cavity,
bounced by material lining plate and burst to top of swirl cavity;
then the movement direction changes again to downward, and thus
material shot out from impeller channel forms constant material
curtain. As a result, one material is bounced, rubbed and ground
twice or several times inside the swirl crushing cavity. Crushed
material is discharged from bottom dumping outlet. A closed path is
formed by cycling sieving system. Normally, three times cycling can
crush material below 4.*5mm diameter. Smart air flow self-cycling
inside swirl cavity removes dust pollution.
It is noticed that overflow feeding does not need to increase power
consumption and wear cost of crushers. Overflow feeding increases
particle density inside crushing cavity, is able to crush more
particles more efficiently and improve utilization of
capacity.
Application
This product is widely applied in
middle and fine crushing of all kinds of ore, cement, refractory
material, aluminum oxide grog, carborundum, glass raw material and
other high hard and super hard material; as well as fine crushing
of water, power, road, building, cement and metal mine
industry.
Features:
1. Adopted advanced techniques
and developed oil-lubricating system. Thus, bearing heated problem
is settled.
2. Feeding system is organized and controlled one compared with
that of un-organized and un-controlled one.
3. most optimized clashing angle of crushing-chamber.
4. Automatic ascending system. 5. Advanced vertical shaft rotating
system.
This series of equipment is optimized on the basis of adopting
advanced domestic and abroad technology. It has feature of reliable
running, easy maintenance and high crushing efficiency.
Cubic-shaped end product is particularly used in stone shaping and
making sand.
Main technical
parameters
|
Model
|
Max Feeding
Size (mm)
|
Motor(kw)
|
Velovity(r/min)
|
Capacity(t/h)
|
Overall
Dimension(L*W*H) (m)
|
Weight(t)
|
|
PCL***0
|
*6
|
****0
|
***0/***0
|
***0
|
***0****0****0
|
5.6
|
|
PCL***0
|
*0
|
*****0
|
***0/***0
|
*****0
|
***0****0****0
|
*2.1
|
|
PCL***0B
|
*0
|
******0
|
***0/***0
|
*****0
|
***0****0****0
|
*3.6
|
|
PCL****0
|
*0
|
******0
|
**0/***0
|
******0
|
***0****0****0
|
*2
|
|
PCL****0
|
*0
|
| 国: |
China |
| モデル番号: |
PCL series
|
| 离岸价格: |
1 ~ 99999 / Set ( Negotiable ) （交渉可能）
Get Latest Price
|
| ロケーション: |
China |
| 最低注文量の価格: |
1 per Set |
| 最低注文量: |
1 Set |
| パッケージの詳細: |
Nude or standard container |
| 納期: |
negotiable |
| 供給能力: |
300 Set per Month |
| 支払いタイプ: |
T/T, L/C |
| 製品グループ : |
sand making machine
|
