Details:
VP-TDM830P is a new
generation analog card with interchangeable FXS_200 and
FXO_200 modules. It can eliminate the requirement for separate
channel banks or access gateways.
VP-TDM830P contains
8 module banks. Each bank supports one analog interface. The module
banks may be filled with up to FXO_200 or FXS_200 modules enabling
the creation of any combination of ports. Scaling of an analog card
solution is accomplished by simply adding additional
cards.
VL-TDM830P works
with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®,
Yate™ and IPPBX/IVR projects as well as other Open Source and
proprietary PBX, Switch, IVR, and VoIP gateway
applications.
Main Features:
1 High security: It adopt tertiary thunder
preventing technology, can prevent the thunder and lightning from
striking effectively
2 No additional power connector or supplier
is required for the operation of FXS modules, reduced the line wave
of the power, has improved the voice quality
3 32 bit bus master DMA data exchanges
across PCI interface at 132Mbytes/sec for minimum host processor
intervention.
4 The high stability firmware is exported /
imported with DMA data exchange, so it accelerated and reduced CPU
load greatly. Under the environment of the same hardware, CPU rate
of utilization is equal to CPU rate of utilization of using 16 port
analog card.
5 World Wide Usable: Configurable line
interface to meet global telephone line interface
requirements.
6 Support all functions of Asterisk PBX
system needed.
7 Humanization is designed: The module
socket that should be nipped is all adopted and stuck to one slice
of sockets, can prevent stabing users finger effectively
.
8 For 2U chassis.
New function:
1 Easy to install , using way is same
as DIGIUM Asterisk card TDM800P
2 If use Trixbox/Elastix/Freeiris2
IPPBX software, it can automatic recognition our cards, dont need
to install any drivers.
Product Spotlight
TDM830P is a new
analog card. It can be used for connecting analog telephones and
analog POTS lines through a PC. It delivers the superior voice
quality on both FXO and FXS interfaces in all 8
ports.
· Adjustable Interrupt Routing
Design
· Interrupts Frequency
Adjustment
· Up to 8 Simultaneous PSTN Calls (Per
PCI Slot)
· Compatible with All Commercially
Available Motherboards
· 3-Month No Question Asked Return
Policy
· Lifetime Warranty
Target Applications
· Channel Bank Replacement /
Alternative
· Small Office Home Office (SOHO)
applications
· Small and Medium Business (SMB)
applications
· Gateway Termination to analog
telephones/lines
Services and Features
· Caller ID and Call Waiting Caller
ID
· ADSI Telephones
· Loopstart Signaling
Support
Technical Specifications
· Up to 8 ports through a combination
of FXS_200 and FXO_200 modules
· Full-length analog
card
· Up to 1 quad FXS or FXO
modules
· RJ45 connector
· 32-bit 33MHz PCI and fully PCI 2.3
compliant, compatible with all commercially available motherboards,
and proper sharing of PCI interrupts
· 32 bit bus master DMA data exchanges
across PCI interface at 132 Mbytes/sec
· Autosense compatibility with 5 V and
3.3 V PCI busses compatible
· Power: 8.21W Minimum, 88.24W Maximum
at 3.3 V or 5 V.
· Operation temperature: 0°C to 50
°C
· Storage temperature: -40°C to
125°C
Operating Systems
· Linux (all versions, releases and
distributions from 1.0 up)
Minimum Hardware
Requirement
· 800-Mhz Pentium
III
· 128MB RAM
· Available PCI
Slot