Vv vW bronze device with two Led Display iMotion3 V+

タイトルまたは説明

Four s easily achieves various voltage/wattage, check battery, external resistace and so on. 

More s, more options.

Features:

1. Variable Voltage 3.0V~6.0V; Variable Watts: 3W**0W

2. Ultra-low static current;

3. Built-in three digital display tube;

4. Adjustable positive pin in the center of the thread, can fix the poor connection problem;

5. Preserved previous settings once you change the battery or take off the battery;

6. Display the actual output voltage when vaping;

7. Amperage limiting system protects against over current situations;

8. Reverse battery protection keeps circuit safe if the battery is installed backward;

User guide:

Assembly the battery and Cartomizer/atomizer with smoke juice correctly.

1. Power on and Smoking:

Press Button A (ON/OFF Button) above 3s till the LED on. Connect your Atomizer to Imotion3 then press D to start smoking.

2. Function select:

Press D 5 times to get into Function selecting manual, then press the "B" or "C" to switch: "1.dR"-Display resistance, "2.dU"-Display Voltage,"3.dP"- Display wattage. Press D again to get in the function.

2.1 Under the "1.dR"mode press the big again, the resistant value of atomizer will be shown on the LED. If without atomizer connecting, LED will show F1.

2.2 Under the "2.dU"mode, press the “B" or "C" to adjust voltage to a suitable value in a circle of 3V~6V, with 0.1 volt increments.

2.3 Under the "3.dP"mode, press the "B" or "C" to increase or decrease of the wattage in a circle of 3P~*0P,with 1watt increments.

2.4 LED indicator and protection.

When Imotion3 is working the LED will shows the voltage or wattage value which it actually be. Keeping pressing D for *0 second Imotion3 will stop working.

3 Power record:

Imotion3 can record your favor voltage or wattage; any press will not be changed.

Press "B" and "C" at the same time above 3 seconds to record current voltage or wattage. Press again Button "B" and "C" for 3 seconds to delete your records.

4 Battery check:

Press A to check battery voltage (2.8v*4.2v) when power on.