タイトルまたは説明
1.output rate is more than *0% 2.operate safe 3.CE Waste plastic
refinery equipment Raw materials can be used Waste/Used industrial
mixed plastics Waste /used rubber tyres, Waste oil: E.g.: waste
diesel oil, engine oil, and other residue oil Waste cable skin
(should first dechlorination treatment) Waste crude oil and so on.
working process First, the raw materials are put into the furnace,
then seal the feed inlet then the bottom of the reactor will slowly
heat the wastes by coal or electricity. When the temperature
reaches the degree of **0 to **0, we will get the crude oil, the
oil steam will be continuous produced until the temperature reaches
******0°C; oil steam will flow through light and heavy components
separating device; light component will enter the condenser and
meanwhile the residues will be discharged automatically in
succession. But the liquefied part will be condensed to rubber oil,
and the part that cannot be liquefied will be into heating
supply system for burning by way of combustion gas purification
system. Characteristics 1.Environmental protection - The production
of the plants is carried out in an environment of no smoking and no
smell, the production of the device is environment protective. To
refine oil from waste rubber and waste plastics, we turn the
rubbish of life into useful oil and carbon black, and help to deal
with living organisms, thereby protects the living environment. 2.
Safety - the plant has the auto alarm system, when there are some
problems, the alarming system will let us know in time, and then we
can avoid the accidents. 3. Various handling capacity - we can make
the plant to handle different quantity of raw materials according
to customers requirement, ranging from 7tons to *0tons per *4 hours
continuously. We are now researching into the new technology; the
new device may be able to deal with *0 tons of raw materials per *4
hours. 4.Energy and manpower saving - the plant can use coal as
well as electricity as the fuel, when the temperature reaches to
**0°C, a large amount of gases will be generated, these gases can
generate a large quantity of heating energy after being burned
fully in the special gas boiler, thus can save energy. There will
only need two or three persons to control the whole system, it is
very convenient. Treatment of the residues There are normally 3
kind of residues-exhausted gas, water liquid, waste solid,
1.exhaust gas - By the means of full combustion in water seal and
gas burner, the pollution of exhaust gas shall be eliminated and a
large amount of fuel shall be saved. Also dust collector will be
used to discharge the smoke and dust, and the discharge of the
smoke and dust meets the related standards in ***1. 2. waste liquid
- Faintly acid waste water will be produced in the process of
treatment of oil products, after neutralization by adding faintly
alkaline liquor, the neutral waste water shall be harmless to
three- grade filtration and can be discharged into special
evaporation processor to vapor. 3. Waste solid - the solid left is
carbon black, no solid waste left.
