1 Clean and roughen the damaged area with the metal file or wire brush,which will help result a more succesful repair. 

 2 Put Gloves on,open the bag and immerse the bandage in temperate water for ****5 seconds & squeeze the bandage to let the water soak in evenly. 

 3 Squeeze out the access water,apply the bandage spirally around the damaged pipe area. Extending up to *0mm(2")either side of the leak. 

 4 When wrapping,put each layer tightly and firmly,using hand to mould and squeeze the layers together in a tightening motion.Continue to apply prssure during application and upon completion. 

 Suggestion: To achieve best result,the bandage should be no less than *0mm thick (****5layers). Allow *0 minutes for bandage to st rock-hard.
 

♦ Useable life: …**3 minutes, depending on temperature of water and pipework

♦ Intial cure time: … 5 minutes

♦ Full cure time: … *0minutes

♦ Shore D hardness: … *0

♦ Tensile strength: … ***5Psi

♦ Maximum service temperature: … **0°C

♦ Pressure resistance: … ***5Psi ( min wrapping *2layers aound damage area) armores of bandages