あなたはまだ TradeKey.com のメンバーではないようです。 今すぐサインアップして、世界中で700万を超える輸入業者および輸出業者と接続します。
今すぐ加入、無料 |
Book call on your favorite time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services


waterborne-road-marking-paint

China

06

3100 ~ 3500 / Ton ( Negotiable ) Get Latest Price

China

3100 per Ton

5 Ton

25kg/barrel

15-30 days

10000 Ton per Year

T/T, L/C

-

今すぐお問い合わせください

製品仕様

Main Raw Material : Acrylic Usage : Road Marking Paint Application Method : Spray State : Liquid Coating Brand Name : Jiuda CAS No. : - Other Names : - MF : - EINECS No. : -
white : yellow

タイトルまたは説明

Waterborn pavement marking paint (Cold Plastic)
Introduction
The product uses water as the solvent and Avecia® Neocryl A-513 water emulsion resin as the base material. It is sprayed with high-pressure airless spraying equipment, and the glass beads are sprayed on the surface, and the cross-linking reaction occurs during the evaporation of the solvent to form the marking coating.
Color:White/Yellow /Customize other colors
 
Advantage:
 
*  Normal temperature construction;
 
*  High solid content and low VOC;
 
*  Environmental protection;
 
*  Can spread the glass beads to the surface.
Feature
Safety: It is environmentally friendly, non-toxic, non-flammable, and requires no heating during construction.
Construction: It can be sprayed into a film at a time, and the construction is simple. The equipment can be rinsed with water.
Adhesion and wear resistance of paint: It is more delicate, and it should be used with caution when the road conditions are risky. It is mostly used for overcoating marking lines, or for roadside lines and places with small traffic.
Glass bead adhesion and reflective effect: the adhesion of the beads is good, and the nighttime reflection effect is lasting.
Stain resistance: good self-cleaning, rain water can be restored. It can be directly recoated directly on the old wire (including hot melt and solvent).
Recoatability: Direct recoating directly on old wires (including hot melt and solvent).
Energy consumption: no heating, less energy consumption.
Overcoating cycle: 6~12 months
 
 
Construction method:Spraying application
Color:White/Yellow /Customize other colors
 
Typical installation areas:
· Mainly used in city road
· Scenic highway
· Airport runway etc.
 
Attention of construction
1.  Before construction, the pavement should be cleaned, with the exception of dust and dirt to ensure the adhesion and adhesion of the paint and the pavement
2.  During construction, the temperature should be kept above 0 ℃
3.  It is strictly forbidden to carry out construction on wet pavement
4.  During construction,it is prohibited to long time and high speed to stir the paint.
 

お問い合わせ

連絡先担当者:Mr. Lee

会社:Shanxi Zhongtu Traffic Technology Co., Ltd

住所:Xian, Shaanxi, China,

To,

Mr. Lee < Shanxi Zhongtu Traffic Technology Co., Ltd >
私は知りたい:

他のサプライヤーからのより多くの製品

Thermoplastic Road Marking Paint Thermoplastic Road Marking
glass beads for road marking paint glass beads for road
TITANIUM DIOXIDE (TiO2) ANATASE sinochem2016 TITANIUM DIOXIDE (TiO2)
MMA Two-Component High-light Pavement Marking material (MMA Cold Plastic) MMA Two-Component
WHITE HOT-MELT ROAD MARKINGS WHITE HOT-MELT ROAD
Hot Melt Paint Thermoplastic Road Marking Paint Power Road Paint Hot Melt Paint
Luminous Road Mark Paint Luminous Road Mark Paint
weather resistant traffic epoxy hot melt road marking paint weather resistant traffic
C5 Aliphatic Hydrocarbon Resin Used in Road marking Paint SH-288S C5 Aliphatic Hydrocarbon
C5 Petroleum resin for road marking paint C5 Petroleum resin for road
ROAD MARKING PAINT (SB95Y) ROAD MARKING PAINT (SB95Y)
DY-BAAM Big-size Air-auxiliary Road Marking Equipment DY-BAAM Big-size
Petroleum Hydrocarbon C5 Petroleum Hydrocarbon C5
Paint for road marking Paint for road marking
glycerol glycerol
C5 Aiphatic Hydrocarbon Solvents Resin for Road Marking Paint C5 Aiphatic Hydrocarbon