タイトルまたは説明
UHP Waterjet Technology(SAME-WATERJET cutting machine, glass
waterjet cutter, CNC steel aluminium plate cutting machine, glass
waterjet cutting machine, ceramic tile plate waterjet cutter, PVC
waterjet cutter, rubber waterjet cutting, sponge paper bumf
waterjet cutting machine, stone marble granite waterjet cutter,
compute CNC water-jet) UHP technology can pressurize ordinary
water to have the pressure of ******0Mpa, then the water is jetted
out at a high speed about *******0m/s from the gem muzzle with
diameter of bore approximately 0.***0.*5mm. This jet has high
energy and can be used to cut soft material. If sufficient grinding
material is added to the jet, it can cut soft and hard materials.
After its jet pressure and flow is adjusted, it can clean various
articles, such as degumming, removal of lacquer and rust, etc. UHP
technology can also be used for high pressure sterilization, food
fresh-keeping, etc. Characteristics of UHP Water Cutting Machine It
can carry out once cutting with any material at any curve (other
cutting methods are all subject to the restriction of material
type); it won't produce heat and hazardous material during cutting,
and the material has no thermal effect (cold state cutting). After
the cutting, the material is easy for secondary processing. It is
safe, environmental friendly, low in cost, high in efficiency, and
can realize any curve's cutting, convenient operation and extensive
applications. Water cutting is the most applicable cutting process
now. Comparison between Water Cutting Machine and Laser Cutting
Laser cutting equipment requires large investment and most of them
are used to cut sheet steel, some non-metal materials, featuring
high cutting speed and high precision, but laser cutting will
produce arc trace in the cutting joint and hereby cause heating
effect; in addition, it is not ideal for some materials, such as
some non-ferrous metals aluminum, copper, alloy, etc. especially it
doesn't perform well in cutting thick metal sheets with bad cutting
surface or failure to cut. The current research on high-power laser
generator is aimed at solving the cutting problem of heavy plates
but the equipment investment, maintenance and operational
consumption also cost a lot. Water cutting features low investment
and running cost, big application scope, high efficiency and easy
operation and maintenance. Comparison between Water Cutter machine
and Plasma Cutting Plasma cutting has evident heating effect, low
precision, and the cutting surface is hard for secondary operation.
Water cutting is made in cold state without any thermal distortion,
and the cut surface is fine and easy for secondary operation, or no
secondary operation is needed. Comparison of Water Cutting machine
and Linear Cutting Linear cutting has higher precision in metallic
processing but the cutting speed is slow, sometimes, perforation
and threading, etc. are needed before cutting and the cutting size
is restricted. Water cutting can give punching, cutting with any
materials, and has high cutting speed and a wide range of
processing size. Comparison of Water Cutting and Other Cutting
Methods Punching shear technique is applicable to some metal parts
with high efficiency, high speed but special moulds and cutters are
required. In comparison with this cutting method, water cutting has
better flexibility and can process work pieces of any shape at any
time. Especially when the material is thick and hard, punching
shear process is difficult or can't achieve the cutting while water
cutting performs well. Flame cutting is also a common process of
cutting metals and has large range of cutting thickness, but it has
stronger heating effect and poorer surface quality and precision
than water cutting does; in addition, water cutting performs well
in the cutting of high melting point materials, alloys and
composites, etc. In such cutting sectors as glass, stone and
ceramics, the traditional method diamond tool can give cutting,
sawing and milling operations with large range of cutting
thickness, high cutting speed. But to those plates with general
thickness, water cutting can give any curvilineal cutting at high
precision and have high rate of finished products; and it also
reduces the production cost and increases the added value of cut
products greatly.
国: |
China |
モデル番号: |
HY380
|
离岸价格: |
30000USD / (交渉可能)
Get Latest Price
|
ロケーション: |
50 |
最低注文量の価格: |
30000USD |
最低注文量: |
1 |
パッケージの詳細: |
- |
納期: |
- |
供給能力: |
1 |
支払いタイプ: |
- |
製品グループ : |
- |