Waterproof Hollow Plastic Formwork used for Construction Building

タイトルまたは説明

Waterproof Hollow Plastic Formwork Description

Pp Hollow plastic formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. Plastic formwork is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. Hollow plastic formwork is energy saving and environmental protection,and can completely replace the traditional steel formwork, wood formwork, square wood, What's more, its amortization cost is very low.



Hollow Plastic Formwork Product Advantages

1.Light Weight.

2.High strength,hardness,impact resistance-small check design.

3.Reuseable *****0times.

4.Easily install and removed, only tapping not releasing agent.

5.Waterproof,anti-high and low temperature



The Application of Plastic Formwork

The PP Hollow Plastic Formwork was widely used in construction projects,bridge engineering,assembly line tumover and other types of projects.



Hollow Plastic Formwork Construction Plastic Formwork Install Detail

1.Use the hollow building formwork intersecting surface laid with *5mm thick.

2.Wood square of the distance: (1) on the surface of the intersection (spacing: wood square distance according to the thickness of the slab concrete, in general, the thickness of less than 0.*5 m floor (spacing is **0 ~ **0 mm.(2) the shear wall (spacing according to adjust the spacing, height and thickness of the wall to wall height of ***0 mm, **0 mm thick wall, for example, using the formwork (*5 mm thickness spacing is **0 ~ **0 mm, if the shear wall, pillar width more than 1 meter, must add the fixed frame.



3.Die shear wall and column puzzle when leaving no gaps, internal Angle (the bottom of the wall) parts must have wood square, beam, wall, formwork connection.Shear wall made 4 after the mold must be assembled into the whole hoisting, then lay flat, reduce labor intensity, forming effect is good.

4. When the nail to the formwork from the formwork edge distance *5 ~ *0 mm, strength wants moderate, nail nails is *0 ~ *0 mm in length, shoulds not be too long or too short.

5.Beam bottom of a piece of wood square must set aside *5 mm seam allowance, wallboard made on wood square seam allowance, it does not leak slurry and wallboard material saving.



Parameter of Waterproof Plastic Formwork