タイトルまたは説明
WIM Main Function
·Dynamic/static
weighing function: able to weight the static or low speed
vehicle.
·Separate the
vehicle automatically: system separates
automatically vehicles going to pass
weighing platform. In normal infrared
vehicle separator separate vehicle, (but when infrared vehicle
separator occur fault, induction coil can separates
vehicle)
·Ensure that the
traffic flow is big and reliable weighing even though there are
lots of vehicle on the lane of tall station. The
system can ensure to separate and count vehicles and weighing
testing data is consistent with vehicle under following situation:
two vehicles drive in weighing area at the same time, beside the
distance between two vehicles is very close, vehicle queues and
stops in weighing area, Trailer passes weighing area and backs off,
vehicle passes the weighing platform again, vehicle incomplete
enter and exit.
·Solve the multi-axle
and wrong axle problem, which caused by a variety of common back
off or
incomplete back off to ensure the weighing accuracy.
·Detect vehicle axle
load, gross weight, overload.
·Detect the speed when
vehicle passes the lane.
·Distinguish vehicle
type basically: Distinguish the quantity of axle, axle type,
vehicle type.
·Record the time when
vehicle passes weighing platform
·The software of
weighing system has “watchdaog” function, it can restart when
system crash. All the processing software, device driver,
demonstration test procedures and demonstration program
source code all have legal license, open the program source
code to owner without any condition, the owner don’t pay extra
cost.
·Form a completed
vehicle weighing information, including axle type, axle load,
multi-axle information, the quantity of tire per axle, the weight
of double axle, axle distance and gross weight.
·Transmit weighing
information to computer of toll station via data interface,
data
interface can meet the following
requirements:
· Transmit the accuracy weighing data to computer of toll
station.
· Accept the basic instruction from computer of toll station
and complete the corresponding action, such as open or close
weighing system.
Weighing system has automatic
buffer storage function, when sending the data to computer of toll
station and it is fail, the weighing system stores data and try to
resend. Before the data reach to the computer of toll station, it
never is replaced by next data to ensure the completeness of
weighing data.
·The indicator has
digital display function, display axle type, vehicle type, speed,
axle load, gross weight and relevant self checking state to make
fault detection of system more intuitive and convenient.
·Weighing System adopts
solidified software, conduct lead sealing according to
measurement regulations to prevent human to change
optionally.
·The weighing
system has self-checkwhen starting, time self-check
function, has the check reset and send the self-check
information to computer of toll station.
·System provides switch
which enter into self-collect, under self collecting state,
to calibrate the weighing equipment conveniently via
indicator panel , to do zero correction and calibration
coefficient correction via indicator.
·When Load cell, tire
identifier, vehicle separator occurs fault, they can
alarm automatically, system presents fault information actively and
reminds user to handle fault in time.
·Standard RS**2/RS**2
interface (connect to computer of toll station)
·System and equipment
interface procedure can stores **0 data about weighing and vehicle
type. The interface program sends instruction that delete those
data in order according to requirement.
·The device drive way
and data communication way are optional, change the data with
computer of toll station, upload gross weigh, axle load, axle type,
speed, overload mark to computer of toll station, automatically
display overload information.
·The system is equipped
with simple control device in toll booth, through human or IPC
(industrial personal computer) to open or close the system.
·The system software
can restart when it crashed. It has recovery function.
·Effective vehicle
separation technology to sure system can work all day.
Specification of WIM
3. ZCU**0DZF***9weight in charge system components list
(apply to 3.2. meters lane)
Serial No
|
Name
|
Model
|
Specification
|
Quantity
|
Note
|
1
|
Weigh in motion
|
ZCU**0DZF
|
3.2mx0.9m
|
1Set
|
|
2
|
Tire identifier
|
LS**2AH*1
|
|
1Set
|
|
3
|
Central control cabinet
|
DKG*1A**0/1
|
|
1Pcs
|
|
4
|
Infrared vehicle separator
|
LHA***2
|
|
1Pair
|
|
5
|
Induction coil
|
|
|
1Set
|
Optional
|
ZCU**0DZF***9weight in charge system components list
(apply to 3.5. meters lane)
Serial No.
|
Name
|
Model
|
Specification
|
Quantity
|
Note
|
1
|
Weigh in Motion
|
ZCU**0DZF
|
3.5mx0.9m
|
1Set
|
|
2
|
Tire Identifier
|
LS**2AH*1
|
|
1Set
|
|
3
|
Central control cabinet
|
DKG*1A**0/1
|
|
1Pcs
|
|
4
|
Infrared vehicle separator
|
LHA***2
|
|
1Pair
|
|
5
|
Induction coil
|
|
|
1Set
|
Optional
|
ZCU**0DZF***9 weight in charge system
components list (apply to 4.0 meters lane)
Serial No.
|
Name
|
Model
|
Specification
|
Quantity
|
Note
|
1
|
Weigh in Motion
|
ZCU**0DZF
|
4.0mx0.9m
|
1Set
|
|
2
|
Tire identifier
|
LS**6AH*1
|
|
1Set
|
|
3
|
Central control cabinet
|
DKG*1A**0/1
|
|
1Pcs
|
|
4
|
Infrared vehicle separator
|
LHA***2
|
|
1 Pair
|
|
5
|
Induction coil
|
|
|
1 Set
|
Optional
|
国: |
China |
モデル番号: |
ZCU-30DZF3509
|
离岸价格: |
( Negotiable ) (交渉可能)
Get Latest Price
|
ロケーション: |
Jiangxi |
最低注文量の価格: |
- |
最低注文量: |
1 Set |
パッケージの詳細: |
Scale body in nude and accessories in carton |
納期: |
25 working days after confirning deposit |
供給能力: |
600 Set per Year |
支払いタイプ: |
T/T |
製品グループ : |
- |