タイトルまたは説明

The multifunction relay control module (DRM*2), designed for the customers different needs, micro-controller as the main control unit, preset *0 kinds of function, also can be based on users need, customize and add other specific function.The module using of high quality power relay module, highpower and high voltagetransistor, red & blue signal lights, double sided PCB board, stable performance,can be widely used in a variety of power control occasions.
 
Product features
1.***5 new upgrade version,increased the collaboration function for each channel;
2.With 2 ways and output control,each channel can be set to *0 kinds of functions,could meet the needs of more applications
3.DC 8V- *6V wide voltage ,increased the power anti reverse function,the module cant be damaged because of a wrong power supply
4.With a red power indicator light,a blue relay indicator light ;
5.The minimum timing can be set to 0.1 seconds,timing accuracy better than 0.*1 seconds;
6.Increased automatic power saving function,users can be set by their own;
7.All settings could automatically save.
8.The trigger signal terminal users can select either high or low pulse trigger;
~ Module Function
The user can select one of the following *0 kinds of function according to keys and display tube, can set and save the parameters, time parameter sets the minimum 0.1 second adjustable, more expertise.
[Function 1]
Timing Pull-in:after power on, when arrived the setting time [T1],the relay pull-in,
and the [T1] can be adjustable between 0.1 second ***0 hours, give [X] interface a high pulse signal(high level duration≥*0ms),repeat the above function.
[Function 2]
Timing Disconnect:after power on the relay pull-in, when arrived the setting time
[T1],the relay disconnect, and the [T1]can be adjustable between 0.1 second ***0 hours,give [X] interface a high pulse signal(high level duration≥*0ms),repeat the above function.
[Function 3]
Timing Pull-in Then Disconnect: after power on, the relay dont pull-in, when
arrived the setting time [T1] relay pull-in; when arrived the setting time [T2 ]relay
disconnect,and the [T1] and [T2] can be adjustable between 0.1 second ***0 hours, give[X]interface a high pulse signal(high level duration≥*0ms),repeat the above
function.
[Function 4]
Timing Disconnect Then Pull-in : after power on, the relay immediately pull-in, when
arrived the setting time [T1] relay disconnect; when arrived the setting time [T2]relay pull-in, and the [T1] and [T2] can be adjustable between 0.1 second ***0 hours, give[X] interface a high pulse signal(high level duration≥*0ms),repeat the above function.
[Function 5]
Unlimited Cycle Mode A: after power on, the relay dont pull-in, when arrived
the setting time [T1] relay pull-in; when arrived the setting time [T2] relay disconnect,then repeat the above status, and the [T1] and [T2] can be adjustable between 0.1 second***0 hours, give [X] interface a high pulse signal(high level duration≥*0ms),repeat the above function.
[Function 6]
Unlimited Cycle Mode B: after power on, the relay immediately pull-in, when arrived the setting time [T1]relay disconnect; when arrived the setting time [T2] relay pull-in,then repeat the above status, and the [T1] and [T2] can be adjustable between 0.1 second ***0 hours, give [X] interface a high pulse signal(high level duration≥*0ms),repeat the above function.
[Function 7]
Limited Cycle Mode A: after power on, the relay dont pull-in, when arrived
the setting time [T1] relay pull-in; when arrived the setting time [T2] relay disconnect,then repeat the above status "NX" times, the [T1] and [T2] can be adjustable between 0.1 second ****9 seconds, the cycle times "NX" can be adjustable between *****9,give[X] interface a high pulse signal(high level duration≥*0ms),repeat the above function.
[Function 8]
Limited Cycle Mode B: after power on, the relay immediately pull-in, when
arrived the setting time [T1] relay disconnect; when arrived the setting time [T2] relay pull-in,then repeat the above status "NX" times, the [T1] and [T2] can be adjustable between 0.1 second ****9 seconds, the cycle times "NX" can be adjustable between *****9, give [X] interface a high pulse signal(high level duration≥*0ms),repeat the above function.
[Function 9]
Self-locking Mode:give [X] interface a high pulse signal, the relay pull-in, again
give a high pulse signal, the relay disconnect.
[Function *0]
Trigger Mode:contain delay off function, the relay does not operate after power
on ,give [X] interface a high pulse signal, the relay pull-in immediately, when
the high pulse signal disappeared, the relay still pull-in, when arrived the setting
time [T1] relay disconnect, the [T1] can be adjustable between 0 second***0 hours.
Remarks: in this function, if[ T1] is 0 second, give [X] interface a high pulse signal,the relay pull-in, when the high pulse signal disappeared, the relay immediately disconnect.
[Function *1]
Trigger mode A :the relay does not operate after power on ,give [X] interface
a high pulse signal, when arrived the timing time [T1],the relay pull-in ,T1 can be adjustable between 0.1 second ***0 hours, give [X] interface a high pulse signal
again, repeat the above function one time.
[Function *2]
Trigger mode B:the relay does not operate after power on ,give [X] interface
a high pulse signal, the relay pull-in , when arrived the timing time [T1], the relay
disconnect,[T1] can be adjustable between 0.1 second ***0 hours, give [X] interface a high pulse signal again, repeat the above function one time.
[Function *3]
Trigger mode C :the relay does not operate after power on ,give [X] interface
a high pulse signal, when arrived the timing time [T1],the relay pull-in ,when arrived the timing time T2,the relay disconnect, [T1] and [T2] can be adjustable between 0.1 second ***0 hours, give [X] interface a high pulse signal again, repeat the above function one time.
[Function *4]
Trigger timing mode D:the relay does not operate after power on ,give [X ]interface
a high pulse signal, the relay pull-in immediately , when arrived the timing time
[T1], the relay disconnect, when arrived the timing time [T2],the relay pull-in, [T1] and [T2] can be adjustable between 0.1 second ***0 hours, give [X] interface
a high pulse signal again, repeat the above function one time.
[Function *5]
Unlimited Cycle Mode A:the relay does not operate after power on ,give [X]
interface a high pulse signal, when arrived the timing time [T1],the relay pull-in ,
when arrived the timing time [T2],the relay disconnect, then repeat the above status,
[T1]and [T2] can be adjustable between 0.1 second ***0 hours, give [X] interface a high pulse signal again ,repeat the above function.
[Function *6]
Unlimited Cycle Mode B:the relay does not operate after power on ,give [X]
Interface a high pulse signal, the relay pull-in immediately, when arrived the timing
time[T1],the relay disconnect, when arrived the timing time [T2],the relay pull-in,then repeat the above status , [T1]and [T2] can be adjustable between 0.1 second ***0 hours,give [X] interface a high pulse signal again ,repeat the above function.
[Function *7]
Limited Cycle Mode A:the relay does not operate after power on ,give [X]interface a high pulse signal, when arrived the timing time [T1],the relay pull-in ,when arrived the timing time [T2],the relay disconnect, then repeat the above status
"NX" times, [T1] and [T2] can be adjustable between 0.1 second ****9 seconds, the
cycle times "NX" can be adjustable between *****9,give [X]interface a high pulse
signal again ,repeat the above function.
[Function *8]
Limited Cycle Mode B:the relay does not operate after power on , give [X]
Interface a high pulse signal, the relay pull-in immediately, when arrived the timing
time [T1],the relay disconnect, when arrived the timing time [T2],the relay pull-in,
then repeat the above status "NX" times, [T1] and [T2]can be adjustable between
0.1 second ****9 seconds, the cycle times "NX" can be adjustable between *****9,give
[X]connector a high pulse signal again ,repeat the above function.
[Function *9]
Condition Cycle Mode A:the relay does not operate after power on , give [X]
connector a high pulse signal,when arrived the timing time [T1],the relay pull-in immediately,when arrived the timing time [T2]the relay disconnect,as long as[X] connector high pulse signal not disappear ,the module will repeat the above function, [T1] and [T2]can be adjustable between 0.1 second ***0 hours,if [X] interface high pulse signal disappear,the relay will disconnect immediately.
[Function *0]
Condition Cycle Mode B:the relay does not operate after power on , give [X]connector a high pulse signal,the relay pull-in immediately,when arrived the timing time [T1],the relay disconnect;when arrived the timing time [T2],the relay pull -in. As long as[X] interface high pulse signal not disappear ,the module will repeat the above function, [T1] and [T2]can be adjustable between 0.1 second ***0 hours,if [X] interface high pulse signal disappear,the relay will disconnect immediately.
Electrical parameters
1. Operating Voltage:DC 8V**6V(Limit working voltage DC 6V**8V).
2. Rated power: static power less than 0.1W,turn off the display is less than 0.*3W
               Maximum power is less than 0.9W.
3. Working Temperature:**0—*0(Limit range**0—*0)
4. Load Capacity:
   the module normally open interface maximum load capacity: DC ***0V/*0A,AC
****0V/*0A
   the module normally closed interface maximum load capacity: DC ***8V/*0A,AC
****5V/*0A
Restrictions:
1. relay life is loaded with action **0,**0 times, and therefore more suitable for
use in low frequency and high current pull control of the situation, is not suitable
for repeated use in the fast-action situations;.
2. Note consider relay port load margin, purely resistive load more than doubled
to left margin, ordinary inductive or capacitive loads must be at least three times
more margin.
Module Interface
Module Voltage/Signal Inpu:There have 5 connectors, all connectors have terminal, user easy to use.
1.DC+:DC power positive;
2.DC:DC power negative;
3.XM:Optically isolated s common interface;
4.X1:Input signal interface 1;
5.X2:Input signal interface 2.
 
Module Output:There have 6 connectors, all connectors have terminal.
1.NO1 :Channel 1 normally open interface,the relay becomes vacant before, after pull-in short with the COM1;
2.COM1:Channel 1 common interface;
3.NC1:Channel 1 normally closed interface, short with COM1 before, become vacant after pull-in.
4.NO2 :Channel 2 normally open interface,the relay becomes vacant before, after pull-in short with the COM2;
5.COM2:Channel 2 common interface;
6.NC2 :Channel 2 normally closed interface, short with COM2 before, become vacant after pull-in.
Dimensions: *5mm * *8mm * *0mm (L * W * H)

 

国:	China
モデル番号:	DRM02A
离岸价格:	13.25 ~ 12.58 / Piece ( Negotiable ) （交渉可能） Get Latest Price
ロケーション:	-
最低注文量の価格:	13.25 per Piece
最低注文量:	1 Piece
パッケージの詳細:	box
納期:	3days
供給能力:	100000 Piece per Month
支払いタイプ:	Western Union, T/T
製品グループ :	Relay module series