タイトルまたは説明
Range of application
It is applicable to local
compensation of power factor of the constant torque load and
changing torque load which are pulled by wire-winding AC
asynchronous motor. It has the functions of reducing the stator
current, diminishing the coil temperature rise, increasing the
power factor of motor, and reducing loss.
Working principle and
characteristics
It adopts the
micro-computer and AC-AC frequency conversion technology, and a
three phase power supply that has the same common frequency of
potential, a *0°phase difference and a equivalent
amplitude value with the motor rotor, is generated by electronic
devices and connectd to the rotor loop, so as to change the power
factor at the rotor side and further to change the power factor at
the stator side and thus to achieve the goal of reactive power
compensation.
All digital design, high
precision and reliability;
With working system that
is independent of the motor, adjustment and maintenance can be
performed without stopping the motor;
Automatic tracking of the
rotor current and a wide range of application make it possible to
use both constant torque load and changing torque
load;
It can increase the power
factor of the motor to over 0.*5, and reduce more than *0% of the
reactive power;
It can reduce *0%~*0% of
the motor stator current, and save *0%~*0% of the line loss and
copper loss;
With automatic malfunction
protection for over-current, low voltage, less phases of rotor,
outer fault, communication failure and parameters mistake,
etc.(Only for WP6 type)
With function of
malfunction record, the numerical value of malfunction can be
looked up and convenient for customers to
analyze.(Only for WP6
type);
With standard
communication connector of RS**5(Only for WP6
type);
Obvious effect of saving
resources and reduce loss and take back the cost within half a
year.
Main technical
parameters
Motor power factor:
reaches over 0.*5(or increases more than
*0%);
Motor stator current:
reduces *0%~*0%ï¼›
Motor coil temperature
rise: decreases more than *0%;
Protection level: IP*0
IP*0.
Standards
Electric control
equipment the second part: electric control equipment equipped
with electronic device GB********9;
WP static phase
advancer Q/XWZ*****0.
Environmental
conditions for use
Ambient
temperature:ï¼*0℃;
Air relative humidity not more
than *0%;
Altitude not exceeding
***0m(If the altitude is over ***0m, it shall be specially
designed in consideration with the specific operating
condition);
The ground level gradient shall
not be more than 5°ï¼›
There would be no risks of fire,
explosion, chemical corrosion and excessive vibration at the
installation site;
Remark: if there is special
service conditions, please state and negotiate with the
manufacturer when making the order.
国: |
China |
モデル番号: |
WP series of static phase advancer
|
离岸价格: |
2000 ~ 20000 / (交渉可能)
Get Latest Price
|
ロケーション: |
China |
最低注文量の価格: |
2000 |
最低注文量: |
1 Set |
パッケージの詳細: |
Standard Packing |
納期: |
In One Month |
供給能力: |
500 Set per Month |
支払いタイプ: |
T/T, Other |
製品グループ : |
Power Factor Compensation Cabinet
|