Yongnuo Upgraded Flash Speedlite YN-560II for 1100D 1000D 600D 550D 50

タイトルまたは説明

1), New LCD Display
We remove away from the battery of LEDs on the back panel to indicate vital information such as power level, zoom step and flash mode / slave mode, it's more clearly and directly.

2), New Multi Mode Function
YN**0 II is the first Chinese full manual-flash with a multi mode. Multi mode is a second flash mode for YN***0 II, in addition to the full-manual mode M, and also in addition to the 2 full-manual slave modes S1″ and S2″ which cant be combined with the multi-mode option.
Multi mode allows firing a series of rapid flashes with a shutter release to produce a stroboscopic effect in the resulting picture. It's often used to show different phases of movement of a BMX cyclist, skateboarder or gymnast, for example, or any other object traveling through the frame.

3), Power Low Indicator / Battery Warning
This feature can give you warning before it's too late, and not only after the power is out, it's also YONGNUO first full-manual flash with this function.

4), New Slave Sensor Cover Design

The flat, one-piece plastic screen has been replaced.

5), New Button Material

The Same Features as the 1st. generation YN***0

a), New Power zoom function:
You can push the on the flash and make it covered focal length range from *4mm to **5mm.

b), Guide number: *8 at ISO**0, **5MM

C), Slave function ( S1, S2 mode):
You just can use YN***0 and YN***0 II in indoor and at a very weak light, but for YN***0 II, you can use it in outdoor environment, and the wireless triggering distance is as around *5m.

d), Sound Indicator:
When the charging process is finished, the flash will give a tich sound, so you may concentrate on the creation process. ( The sound can be closed )

e), New Charging socket for external power pack:
You can charge this YN***0 II to meet the higher demand for charging recycel, you can use SF**8 for Canon version and SF**7 for Canon version to charge it.

f), New PC synchronous port:
It's the 3.5mm standard PC port, you can use YN***0 II with the flash trigger via the cable with 3.5mm port. For RF***2, you can use the RF***2 **1 / 3.5mm cable, and so on....

g), Super speed of charging recycle:
It only takes 3 seconds in charging after full power output. Even without new batteries, you can get the super charging speed that it only needs **5 seconds, you can completely get rid of the nightmare of anxious waiting for charging,. In addition, you can use the external power pack to accelerate the charging speed once more.

h), Supporting high speed continuous shooting:
Under the ouput level of 1/8 or below, YN***0 II can support the 8FPS high speed continuous shooting.

i), The Improved power saving mode:
In the power saving mode, the flash keep sidle for 3 minutes and then it will setp into the dormancy state in order to save power. and it will automatically shutdown aftger keeping idle for *5 minutes. If you disabled the power saving mode, the power saving indicator will be on, the flash won't step into the dormancy state aftger being stopped. It will be automatically shut down after *0 minutes

j), The more fine output control:
The adjustment range of YN***0 output level is 1/1, 1/2, 1/4, 1/8, 1/*6, 1/*2, 1/*4, 1/**8, there are 8 levels of putput and each level has 8 ine tuning stalls.

k), The automatic setting saving:
It can automatically save your current setting.

l), Overheating protection:
If it is used too frequently, its overheating protection function will be triggered, the red and green lights of the charging indicator will blink alternatively, and it will be locked. in such case, please wait for about 3 minutes to cancel the protection before continuing the using.

m), Maually set the zooming position:
The coverd focal length of the flash will switch in circel of *4 / *8 / *5 / *0 / *0 / *0 / **5mm by pressing the .