Zirconia ceramic foam filter

タイトルまたは説明

Zirconia ceramic foam filter

Application:For the filtration of molten steel and alloy,large scale iron casting
 
Product standard:China national GB/T *********0
 
Zirconia ceramic foam filters are determined for filtering of steel and steel alloys up to the temperature of ***0 °C.
Filters are recommended especially for high quality grades of alloys.
 
-Drop turbulent of molten steel and alloy
-Improve accepted rate of steel casting
-Reduce foreign matter of steel casting
-Drop twice oxide flaw 
-Reduce second-face flaw after machine process
 
PHYSICAL PROPERTY: 
Main material:ZrO2
Applied Temperature:≤***0℃
Color:Yellow
Hole density (PPI):*0/*0PPI(PPI=pores per inch)
Porosity(%):****7
Bending strength（Mpa）:≥1.0
Compressive Strength(MPa):≥1.*5
Bulk Density(g/cm3):0.**0.*5
 
DIMENSIONS:
Length*width*height=(*****0)*(*****0)*(****5)mm
With round,square and rectangle shape.
Size tolerance:±1mm
Pore size: *0/*0PPI          
PPI tolerance:±2PPI
 
CHEMICAL COMPOSITION: 
Al2O3 MgO SiO2 Fe2O3 ZrO2
≤1.8% ≥3.0% ≤0.5% ≤0.1% ≥*4.*0%
 
APPEARANCE REQUIREMENTS:
-No cracking allowed across the full length of the edge
-Any fine cracks within the filter matrix may not be through-going
-Filters should be free from loose debris
Zirconia ceramic foam filter

Application:For the filtration of molten steel and alloy,large scale iron casting
 
Product standard:China national GB/T *********0
 
Zirconia ceramic foam filters are determined for filtering of steel and steel alloys up to the temperature of ***0 °C.
Filters are recommended especially for high quality grades of alloys.
 
-Drop turbulent of molten steel and alloy
-Improve accepted rate of steel casting
-Reduce foreign matter of steel casting
-Drop twice oxide flaw 
-Reduce second-face flaw after machine process
 
PHYSICAL PROPERTY: 
Main material:ZrO2
Applied Temperature:≤***0℃
Color:Yellow
Hole density (PPI):*0/*0PPI(PPI=pores per inch)
Porosity(%):****7
Bending strength（Mpa）:≥1.0
Compressive Strength(MPa):≥1.*5
Bulk Density(g/cm3):0.**0.*5
 
DIMENSIONS:
Length*width*height=(*****0)*(*****0)*(****5)mm
With round,square and rectangle shape.
Size tolerance:±1mm
Pore size: *0/*0PPI          
PPI tolerance:±2PPI
 
CHEMICAL COMPOSITION: 
Al2O3 MgO SiO2 Fe2O3 ZrO2
≤1.8% ≥3.0% ≤0.5% ≤0.1% ≥*4.*0%
 
APPEARANCE REQUIREMENTS:
-No cracking allowed across the full length of the edge
-Any fine cracks within the filter matrix may not be through-going
-Filters should be free from loose debris