ZN-5 plating additive for acid zinc plating,zinc plating additives,

タイトルまたは説明

ClZn-5 for Acidic (KCl) Zinc Plating
PROPERTIES:
1. It is composed by primary brightener and auxiliary one.
2. It owns high gloss and leveling ability.
3. It especially suits barrel plating, and has high current efficiency, good deep plating, wide temperature and good stability.
4. The layer appears dense, white and fine, it is easy for coloring, blue-white and white passivation.
Bath composition & Operation condition:
Rack plating
Barrel plating
KCL
200~220g/L
200~240g/L
ZnCl2
60~70g/L
40~60g/L
H3BO3
30~35g/L
30~35g/L
ClZn-5A
1~2ml/L
1~2ml/L
ClZn-5B
30~40ml/L
30~40ml/L
PH
4.5~5.5
5~6
Dk
0.5~8A/dm2
0.5~5A/dm2
Temp.
Room temp (10~40°C)
Sk : Sa
1:1.5~2
Anode
0# zinc ingot
BAKE MAKE-UP:
1. Add water of 2/3 of bath volume, then slowly add dissolved H3BO3 into 80°C hot water.
2. Add preset amount of KCL and ZnCl2, agitate it till it dissolves.
3. Add preset amount of ClZn-5A 1 time with water, then add it into bath with set ClZn-5B, agitate it evenly, then start plating.
BATH MAINTENANCE:
1. The consumption of primary brightener ClZn-5A is 80-120ml/KAH, dilute it 2-5 times with water before replenishment.
2. The consumption of second brightener ClZn-5B is 80-120ml/KAH, dilute it 1-3 times with water before replenishment.
3. To keep bath stable, replenish KCL and H3BO3 during operation, Zinc ion is replenished by dissolving anode.
4. Dilute HCL agent 5-10 times when adjusting PH low.


wuhan fengfan electroplating international trading co.,ltd