Triveni Interchem P.Ltd

it is spun into ropes or fabric sheets that can be used as such or as an ingredient in composite material components.It is also used to make modern dr

Lignosulfonates are also used for the production of plasterboard to reduce the amount of water required to make the stucco flow and form the layer bet

it is dissolved in n-butanol and xylene. It is then used to cross-link with alkyd, epoxy, acrylic, and polyester resins, used in surface coatings. The

Melaninis a pigment that is ubiquitous in nature, being found in most organisms (spiders are one of the few groups in which it has not been detected).

It is derived from latex, a milky colloid produced by some plants. The plants are tapped, that is, an incision made into the bark of the tree and the

The excellent mechanical properties of the polymer allow the composite sheets to reach mechanical properties in the ranges where usually titanium and

It is also used for determining the emission of chemical substances from plants, soil and commercial products.

In the field of electroanalysis, conductive polymers are widely employed as coatings conferring the electrode systems antifouling properties and possi

Poly(4-methyl-1-pentene) is a polymer of 4-methyl-1-pentene. The polymer has a high optical transparency, a high thermal stability, excellent dielectr

Poly(methacrylic acid) (PMAA) is a polymer made from methacrylic acid. It is often available as its sodium salt, poly(methacrylic acid) sodium salt.

It is rarely used in its pure form due to difficulties in processing. It is mainly used as blend with polystyrene, high impact styrene-butadiene copol

Polyphenylene sulfide is an engineering plastic, a high-performance thermoplastic.[2] PPS can be molded, extruded, or machined to high tolerances. In

PPV is the only polymer of this type that has so far been successfully processed into a highly ordered crystalline thin film. PPV and its derivatives

PVP is used in electronics as a dielectric layer in organic transistors in organic TFT LCD displays. Thin films of cross-linked PVP can be used in thi

Polyacetylene (IUPAC name: polyethyne) is an organic polymer with the repeating unit (C2H2)n.

It can be used in combination with an anionic polyelectrolyte like poly(sodium styrene sulfonate) to form a layer-by-layer adsorbed film of negatively

Polyaniline (PANI) is a conducting polymer of the semi-flexible rod polymer family. Although the compound itself was discovered over 150 years ago, on

PBI is used to fabricate high-performance protective apparel such as firefighter turnout coats and suits, astronaut space suits, high temperature prot

It is also used to manufacture golf balls, various elastic objects and to coat or encapsulate electronic assemblies, offering high electrical resistiv

It is also used synergistically as a blend element to modify the characteristics of other polyolefins like polypropylene and polyethylene. Because of

Polydiacetylenes (PDAs) are a family of conducting polymers. They are created by the photopolymerization of diacetylene moieties. They have multiple a

It is an electroluminescent conductive polymer that characteristically emits blue light.[1] Like other polyfluorene polymers, it has been studied as a

Polyethylene amine is a polymer of aziridine with the molecular formula (CH2CH2NH)n. It is a structural analogue of polyethylene glycol with -NH- in p

Polyimide (sometimes abbreviated PI) is a polymer of imide monomers. The structure of imide is as shown. Polyimides have been in mass production since

Polyketones are a family of high-performance thermoplastic polymers. The polar ketone groups in the polymer backbone of these materials gives rise to

It is used for gas permeable packaging, autoclavable medical and laboratory equipment, microwave components, and cookware. It is commonly called TPX,

Polynucleotides occur naturally in all living organisms. The genome of an organism consists of complementary pairs of enormously long polynucleotides

A polyol is an alcohol containing multiple hydroxyl groups. In two technological disciplines the term "polyol" has a special meaning: food sci

Polypyridinium salts are members of a class of main chain polyelectrolytes.

Polypyrroles are conducting polymers of the rigid-rod polymer host family, all basically derivatives of polyacetylene. Polypyrrole was the first polya

Polysaccharide peptide (PSP) is a protein-bound polysaccharide extracted from the edible mushroom Coriolus versicolor. PSP is currently in the animal-

Polystyrene sulfonates are used to remove dangerously high levels of potassium in the blood (e.g., due to digoxin toxicity), since hyperkalemia can ca

Polythiophenes (PTs) result from the polymerization of thiophenes, a sulfur heterocycle, that can become conducting when electrons are added or remove

Semi-flexible rod polymers are a kind of organic polymer which may be converted to conductive polymers by appropriate oxidations or doping.

It was invented by amateur chemist Maurice Ward (1933-2011) during the 1970s and 1980s, and received much publicity in 1993 thanks to coverage on the

It is also known as SAN. It is widely used in place of polystyrene owing to its greater thermal resistance. The chains of the polymer show alternating

Styrofoam is composed of ninety-eight percent air, making it light weight and buoyant.[2] Because of its insulating properties and buoyancy, it was ad

Synthetic rubber is any type of artificial elastomer, invariably a polymer. An elastomer is a material with the mechanical (or material) property that

Technora is an Aramid that is useful for a variety of applications that require high strength or chemical resistance. It is a brandname of the company

Tholin [after the ancient Greek word (thols) meaning "not clear"] is a heteropolymer molecule formed by solar ultraviolet irradiation of