タイトルまたは説明

1:*0 brushed ESC
**0A-way electronic governor with brake
Battery support: Ni-MH, Ni-Cd 4 to 6 (4.8V ~ 7.2V); Group 2 lithium battery (7.2V)
Current parameters: forward **0A, backward **0A brake **0A
 BEC output: voltage 5.6V, current 2A. (Supply receiver, servos electricity)
Dimensions: L*3mm W*9mm H*7mm (excluding projecting fin portion)
1. Automatically find the center position.
Frequency drive system
3 Use the low internal resistance of the MOSFETs
4 apply to the car, the use of ship models
Operational Guidelines:
A correct power supply battery connection on both ends of the wiring board red line is positive, black, compared with the negative. (Or connectivity standard DC the battery plug Daejeon public interpolation / T plug / banana plug)
2, the ESC output red and black lines are connected car **0 motor red and black lines.
3, open the ESC power switch, the motor issue a "beep" sound, and then turn on the transmitter power, the motor will issue a "duo ~ it ~ microphone sound prove that the remote control signal has been successfully connected and the ESC.

Weight:*0g