12V 1CH Fixed code remote control switch system

离岸价格

Get Latest Price

6 ~ 8 / Set ( Negotiable )

1000 Set Minimum Order

国:

China

モデル番号:

离岸价格:

6 ~ 8 / Set ( Negotiable )（交渉可能） Get Latest Price

ロケーション:

最低注文量の価格:

6 per Set

最低注文量:

1000 Set

パッケージの詳細:

boxs and plastic bags

納期:

15-20 days

供給能力:

10000 Set per Month

支払いタイプ:

T/T, Western Union, PayPal

製品グループ :

今すぐお問い合わせください

Shenzhen Century Aoke Electronics Co., Ltd

China

1333 信任点

This product is also available on Amazon for retail.

連絡先担当者 yuan

Shenzhen, Guangdong

今すぐお問い合わせください

タイトルまたは説明

Feature:

Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with DC0~**0V
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
This switch can learn different coding remote controls(such as ***2,***7,***0 ect.)
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes. If you use multi- transmitter, you can control the controller with different s, it wont affect each other.
Transmitting Frequency: **5MHz / **3MHz
The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding.

Receiver:

Model No.: AK-RK****2
Channel: 1 CH
Control Mode: Jog(Press and hold -> On; Release -> Off)
Coding Type: Learning code
Power Supply (Operating Voltage): DC*2V±2V,furthermore,customized 3V,9V,*4V are acceptable
Size:*0**4**7mm
Maximum Working Current: *0A
Receiving sensitivity:-95dB

About Working Way:

Output Working way for learning code switch-Only for Jog,changed by jump cap.
Jog*-Press and hold one is working. Release your finger on the same is stop/ Null(Do not connect any JPs).

About Learning and clearing Method:

Red indicator *-Power indicator, yellow indicator—Learning indicator, Green indicator—Working indicator.
After getting to the power, the red indicator will be on, then press and hold the learning key for about 2s, the yellow indicator will be on, here put in learning state, release the learning key ,press any of the remote control , the yellow indicator would be off after flashing. Next, to check whether it learning successfully, please press the of remote control, the green indicator would be on state, and the relay tapped, it is ok.
When the learning indicator in On state, still press the of remote control, after it getting to Off, it means clearing is OK.

Application:

Garage door control
Access control system
Home/Mall Automation systems such door/window/curtain control, lights control ect.
Kinds of motor control system

Pay attention:
· The default setting of output way is Interlock; If you need other output way can leave a message to change it for you before the delivery.
· Here is the 1 Channel switch and 1- remote control .you can choose the working way as you need, we suggest the best to choose the interlock, then all the s can be used.
· The working frequency optional from **5/**3MHz,other frequency point from **0 to **0MHz can be customized.
· The theoretical distance is **0m, which shall be operated in an open ground; no barriers and no any interference. However, in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance cannot reach **0m. If you need longer range, please choose other series of remote control, such as ***0m/***0ft; or you can add the External Extend Antenna or Transponder on the receiver to extend the range.

国:	China
モデル番号:	-
离岸价格:	6 ~ 8 / Set ( Negotiable ) （交渉可能） Get Latest Price
ロケーション:	-
最低注文量の価格:	6 per Set
最低注文量:	1000 Set
パッケージの詳細:	boxs and plastic bags
納期:	15-20 days
供給能力:	10000 Set per Month
支払いタイプ:	T/T, Western Union, PayPal
製品グループ :	-